User manual HARVIA BX60

[. . . ] These instructions for installation and use are intended for the owner or the person in charge of the sauna, as well as for the electrician in charge of the electrical installation of the heater. After completing the installation, the person in charge of the installation should give these instructions to the owner of the sauna or to the person in charge of its operation. Please read the instructions for use carefully before using the heater. the heater is designed for the heating of a sauna room to bathing temperature. [. . . ] According to established sauna conventions, you must not disturb other bathers by speaking in a loud voice. Do not force other bathers from the sauna by throwing excessive amounts of water on the stones. If you are in good health, you can have a swim if a swimming place or pool is available. Rest for a while and let your pulse go back to normal. Have a drink of fresh water or a soft drink to bring your fluid balance back to normal. Staying in the hot sauna for long periods of time makes the body temperature rise, which may be dangerous. Keep away from the heater when it is hot. The stones and outer surface of the heater may burn your skin. Do not let young, handicapped or ill people bathe in the sauna on their own. Consult your doctor about any health-related limitations to bathing. Consult your child welfare clinic about taking little babies to the sauna. Be very careful when moving in the sauna, as the platform and floors may be slippery. Never go to a hot sauna if you have taken alcohol, strong medicines or narcotics. Do not hang clothes to dry in the sauna, as this may cause a risk of fire. All service operations must be done by professional maintenance personnel. Check that the fuses to the heater are in good condition. Turn the thermostat to a higher setting ( 1. The timer works but the heater does not heat. Check that the fuses to the heater are in good 6 Turn the thermostat to a higher setting ( 1. Too tightly piled stones, the settling of stones with time or wrong stone type can hinder the air flow through the heater, which results in reduced heating efficiency. The sauna room heats quickly, but the temperature of the stones remain insufficient. Turn the thermostat to a lower setting ( 1. [. . . ] For example, a 10 m³ sauna room with a glass door equals the output requirement of about a 12 m³ sauna room. if the sauna room has log walls , multiply the sauna's volume by 1 , 5. Choose the correct heater output from Table 2. Bench towels should be used during bathing to prevent sweat from getting onto the benches. [. . . ]