Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HARVIA CAULDRON. We hope that this HARVIA CAULDRON user guide will be useful to you.
Lastmanuals help download the user guide HARVIA CAULDRON.
Detailed instructions for use are in the User's Guide.
[. . . ] sea air and a humid climate may corrode the metal surfaces of the cauldron. Do not use the cauldron without the fire chamber. Clean the inner cauldron carefully prior to use ( 2. Dry chopped firewood clinks when it is knocked together with another piece. [. . . ] By starting the fire on the top of the firewood, fewer emissions are produced. The amount of draught can be adjusted by opening the ash box. If the chimney has a damper plate, it should be closed after the fire has finished burning. This helps to keep the water warm longer. The ash box should be emptied regularly so that the combustion air that is lead through the box would cool off the fire grate and lengthen its life span. Get a metal container, preferably standing model, to put the ash in. As the removed ash may include hot embers, do not keep the ash container close to combustible material. Empty the inner cauldron if the cauldron is not used for a long time or if the water may freeze. If the outer surface of the inner cauldron is covered with a thick layer of soot, water will heat up more slowly and the consumption of firewood will increase. Wipe dust and dirt from the cauldron with a damp cloth. remove lime stains using a 10 % citric acid solution and rinse. If for some reason rust spots appear on the inner cauldron, remove them with 400-grit or rougher water sandpaper. Clean the inner cauldron carefully after sanding. There is low pressure caused by an extractor fan or another device in the room. Make sure there is enough air to compensate. Several fireplaces are used at the same time. Make sure there is enough air to compensate. When the inner cauldron is filled with cold water, some of the water may condense on the cauldron's outer surface, which may arouse suspicion of a possible leak in the cauldron. This is, however, a natural phenomenon and will disappear as the water warms up. Before installing the cauldron make sure that all safety distance requirements are fulfilled. [. . . ] The adjustable feet could scratch the floor surface if the cauldron is moved on the floor. Make an opening in the fireproof wall for the flue connection. Notice that the opening has to be at the correct height, if you intend to use, for instance, a protective bedding. The hole should be slightly larger than the flue connecting pipe. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HARVIA CAULDRON
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HARVIA CAULDRON will begin.
