User manual HASBRO GOODBYE MR. CHIPS GAME

[. . . ] Refer to the Help of Adobe Reader for tips on how to use Adobe Reader. You can print out the “Handycam” Handbook. Index  US Read this first Using the camcorder   Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers.  Viewfinder LCD Screen   Lens Built-in microphone Do not record the sun or leave the camcorder under the sun for a long time. The inside of the camcorder may be damaged. If sunlight is focused on a nearby object, it may cause a fire. [. . . ] For details, see page 47. Search image SteadyShot You can compensate for camera shake. SteadyShot] to [Off] ( ) when Set [ using a tripod (sold separately), then the image becomes natural. Available settings vary depending on the lens. Active (  Standard ) Provides a more powerful SteadyShot effect. Provides a SteadyShot effect under relatively stable recording conditions. APS-C Size Capture Changes the image size according to the attached lens. When a DT lens is attached, the camcorder automatically selects APS-C Size Capture mode.  Auto ( ) The camcorder detects the attached lens and automatically selects full size or APS-C size. is displayed when APS-C size is selected. On ( Off ) Index Off ( ) Always shoots in APS-C size. Always shoots in full size. The SteadyShot function is not used. SteadyShot You can compensate for camera-shake when a lens compatible with Steadyshot is attached.   Notes The periphery of the screen may darken when [APS-C Size Capture] is set to [Off] and a lens for the APS-C size, such as a DT lens, is attached. 73 US Phase Detection AF Enhances autofocus speed by the Phase Detection AF function.  Auto Selects whether or not to use the Phase Detection AF.   Off Does not use the Phase Detection AF.  Notes You can use the Phase Detection AF only when an A-mount lens (sold separately) is attached to the camera using the mount adaptor (supplied). It depends on individual differences and conditions, such as distance to the subject, or if the subject looked away from the pre-strobe.  There are certain flash units that you cannot use with Red Eye Reduction. For the compatibility of a particular flash unit, consult your Sony dealer or local authorized Sony service facility.     Notes Only applicable for the built-in microphone. Audio Rec Level You can adjust the volume when recording. is displayed on the recording screen when you change the volume.  Reset Returns to the normal level.    Tips Pupils become dilated in dark environments. Flash light is reflected off the blood vessels at the back of the eye (retina), causing the “redeye” phenomenon.   Wind Noise Reduct. You can record a movie with less wind noise by cutting the low-frequency sound input from the built-in microphone.  Off Disables wind noise reduction. Tips We recommend that you use headphones to check the level when adjusting the setting. Set a lower level to naturally capture continuous loud sound. To capture quieter sound at an easy-to-hear level, increase this setting. The limiter is always working regardless of the Audio Rec Level setting. This function is not available when using an audio input device connected to the multi interface shoe. Search image Guide Frame You can display the frame and check that the subject is horizontal or vertical. Does not display the guide frame. On ( ) Index Enables wind noise reduction. 75 US    Tips Positioning the subject at the cross point of the guide frame makes a balanced composition. [. . . ] Note that shooting may not be possible if it is difficult to focus on a subject. To change the battery of the Wireless Remote Commander  While pressing on the tab, inset your fingernail  Place a new battery with the + side facing up.  Insert the battery case back into the Wireless into the slit to pull out the battery case. Remote Commander until it clicks.  SCAN/SLOW buttons (p. 34)  / (Previous/Next) buttons (p. 34)  PLAY button  STOP button  DISPLAY button (p. [. . . ]