User manual HASBRO GOOSEBUMPS COOL GHOUL CARD GAME

[. . . ] ˎˎ The LED light unit and parts around it may get hot and burn you. ˎˎ When the ring light is used in low-temperature conditions, battery performance is reduced. For example, lighting time becomes shorter than at room temperature (about 25 °C) and charging time becomes longer. we recommend having new spare batteries available. [. . . ] Identifying the parts (See illustration ) The ring light turns off too quickly. GOOSEBUMPS COOL GHOUL CARD GAME © 2012 Sony Corporation Printed in China Ring Light 1 2 3 4 5 6 7 8 9  1 Battery cover Operating part Ring part Release button POSITION switch BRIGHT dial POWER lamp POWER switch Fixed knob Remarques The ring part of the ring light ˎˎ Make sure that the adaptor ring is attached to the does not attach. The ring light may not operate properly if other batteries are used. * Do not use AA Ni-Mn dry batteries and AA Mn dry batteries. 5 6 7 10 11 12 8 9 2 Insert the four batteries in the directions marked inside the battery case. ˎˎ Do not use the batteries with combination as below: ˋˋnew or fully charged with not fully charged ˋˋdifferent types or brands ˎˎ Always check the   poles of the batteries before inserting the batteries. If you insert the batteries in the wrong direction, the ring light will not come on. ˎˎ Adaptor rings for filter diameters 49 mm and 55 mm are supplied with this ring light. You cannot use this ring light with a lens that has a different filter diameter. ˎˎ You cannot use this ring light with a lens that is focused by rotating the front rim. With such a lens, you can use this ring light by fitting a Macro Light Adaptor (FA-MA1AM). To avoid electrical shock, do not open the cabinet. refer servicing to qualified personnel only. Do not expose the batteries to excessive heat such as sunshine, fire or the like. Keep out of reach of small children to prevent accidential swallowing. 2 Set the POWER switch of the operating part of the ring light to “ON. € 3 Point the camera at the subject and shoot. When the ring light is attached to the camera, the weight of the lens part makes it unstable. We recommend using a tripod or supporting the lens firmly with one hand. ˎˎ When reproducing true colors, select the custom white balance mode of the camera. Reset the white balance if you have changed the BRIGHT dial of the operating parts. Refer to the operating instructions of your camera for how to change the settings. [. . . ] Meaning of POWER lamp states ˎˎ When it lights (green) Batteries have sufficient power. ˎˎ When it flashes slow (red) (Battery Pre-End) Prepare new batteries. * The flashing time changes depending on the battery type being used. ˎˎ When it flashes fast (red) (Battery End) The ring light is put out. [. . . ]