User manual HASBRO GOTCHA

[. . . ] Interchangeable Lens Objectif interchangeable ????? Align the white index on the lens barrel with the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. not press the lens release button on the camera when Do mounting the lens. ) While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. [. . . ] ) While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. Pose et dpose de l?objectif Pour poser l?objectif (Voir l?illustration ???. Attaching the Lens Hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. E 10-18mm F4 OSS ? E-mount 2012 Sony Corporation SEL1018 Align the red line on the lens hood with the red line on the lens (hood index), then insert the lens hood into the lens mount and rotate it clockwise until the red point on the lens hood is aligned with the red line on the lens (hood index) and the lens hood clicks into place. When using a flash with the camera, remove the lens hood to avoid blocking the flash light. When storing, fit the lens hood onto the lens backwards. 5 225 Rotate the zooming ring to the desired focal length. Focusing There are three ways to focus. When using a flash, shoot at least 1m (3. With certain combinations of lens and flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. The built-in flash and supplied flash cannot be used. Use a separately sold flash that has a flash coverage compatible with the focal length of the lens. 1 ?????????????????? (1) (2) ????????? ??When using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. Identifying the Parts 1 Hood index 2 Focusing ring 3 Zooming ring 4 Focal-length scale 5 Focal-length index 6 Lens contacts* 7 Mounting index * Do not touch the lens contacts. [. . . ] When using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. Identifying the Parts 1 Hood index 2 Focusing ring 3 Zooming ring 4 Focal-length scale 5 Focal-length index 6 Lens contacts* 7 Mounting index * Do not touch the lens contacts. [. . . ]