User manual HASBRO GUINNESS GAME OF WORLD RECORDS FRENCH

[. . . ] Do not expose the appliance to naked flame sources (for example, lighted candles). Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] Select “Control for HDMI, ” then press . The Control for HDMI function does not work in the following cases: • When you connect the receiver to a device which does not correspond to the Sony Control for HDMI function. € When you connect the receiver and equipment using other than an HDMI connection. € The Control for HDMI function does not work on a device connected to the HDMI OUT B jack of the receiver. The Control for HDMI function of the receiver is activated. 78US 5 Turn the Control for HDMI function of the connected equipment on. For details on setting the connected equipment, refer to its operating instructions. When you set “Pass Through” to “On, ” or “Auto, ” sound and image can be output only from the TV while the receiver remains in standby mode. start playback on the playback equipment. 6 Repeat step 5 to set the Control for HDMI function and to display the image of all the playback equipment you want to use. To use the One-Touch Play function of the camcorder 1 Turn the Control for HDMI function on for both the receiver and your camcorder. You can also operate this function using the TV menu. For details, refer to the operating instructions of the TV. Note When “Control for HDMI” is set to “On, ” the “Audio Out” settings in the HDMI Settings menu will set automatically based on the System Audio Control settings. Scene setting on the TV Graphics Sound field A. Auto Home Theater Control If a “Home Theater Control”-compatible TV is connected to the receiver, an icon for Internet based applications appears on the connected TV. You can switch an input of the receiver or switch sound fields by using your TV’s remote control. You can also adjust the level of the center speaker or the subwoofer, or adjust the settings of “Sound Optimizer” (page 63), “Dual Mono” (page 98), or “A/V Sync” (page 99). To use the Home Theater Control function, your TV must be able to access a broadband service. Audio Return Channel (ARC) If the TV is compatible with the Audio Return Channel (ARC), an HDMI cable connection also sends a digital audio signal from the TV to the receiver. You do not need to make a separate audio connection for listening to TV sound from the receiver. For details, see “Switching between digital and analog audio” (page 82). [. . . ] The measurement process has completed with high noise level detection. You may be able to achieve better results if you try in a quite environment again. The input from the microphone is too big. € It may be too close the distance between the speaker and the microphone. [. . . ]