User manual HASBRO GUM GUYS

[. . . ] Do not expose the appliance to naked flame sources (for example, lighted candles). Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] start playback on the playback equipment. 6 Repeat step 5 to set the Control for HDMI function and to display the image of all the playback equipment you want to use. To use the One-Touch Play function of the camcorder 1 Turn the Control for HDMI function on for both the receiver and your camcorder. Note When you pull out the HDMI cable or change the connection, perform the steps above. However, you do not need to perform these steps when you use an HDMI IN 1, IN 2, IN 3, or IN 9 jack. 2 Connect your camcorder to one of the HDMI IN 1 , IN 2 , IN 3 , and IN 9 jacks (page 36). If you use a Sony camcorder, the TV is turned on in conjunction with the receiver, then the camcorder starts playback automatically. If you use a non-Sony camcorder, play back the camcorder continuously. Notes • Depending on the TV, the start of the content may not appear. € Connect equipment such as a Sony camcorder equipped with the One-Touch Play function simply by making an HDMI connection to the HDMI IN 1, IN 2, IN 3, and IN 9 jacks. If you use other HDMI IN jacks, the receiver may not be switched to an appropriate input. Audio Return Channel (ARC) If the TV is compatible with the Audio Return Channel (ARC), an HDMI cable connection also sends a digital audio signal from the TV to the receiver. You do not need to make a separate audio connection for listening to TV sound from the receiver. For details, see “Switching between digital and analog audio” (page 88). Remote Easy Control You can use the TV remote control to operate the menu of the receiver. Scene Select The optimum picture quality and sound field are selected automatically according to the scene selected on your TV. For details on the operation, refer to the operating instructions of the TV. Note The sound field may not switch depending on the TV. Select the receiver (AV AMP) recognized by the TV. notes • The receiver is recognized as “Tuner (AV AMP)” by the TV. € Your TV must be compatible with the link menu. € Depending on the type of TV, some of operations may not be available. [. . . ] € When you use the receiver as a pre-amplifier, either messages may appear, depending on the power amplifier you connect. However, there will be no problems, even if you continue to use the receiver without changes. The distance and position of a subwoofer cannot be detected. Or the angle of the speaker position cannot be detected. [. . . ]