User manual HASBRO GUNG HO

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] • The Bluetooth devices to be connected must support A2DP (Advanced Audio Distribution Profile). About pairing Pairing is an operation where Bluetooth devices are registered with each other beforehand. Use the procedure below to pair the system with your Bluetooth device. Once a pairing operation is performed, it does not have to be performed again. Once a pairing operation is performed, you need not do it again. However, repeat of pairing is required in the cases listed below. • Pairing information is deleted by repairing the system. € Pairing for ten or more devices is to be set. This system can set pairing with up to nine devices. If pairing is to be set on a device after pairing has been set on nine devices, the pairing information on a device whose connection date is the oldest is overwritten with new information. € The connection history with this system is deleted on the connected device. If pairing is not successful, redo the procedure from step 1. € If you wish to pair with several Bluetooth devices, perform the procedure from steps 1 to 3 individually for each Bluetooth device. € If no pairing information is stored in the system, the system automatically enters pairing mode when “BT AU” is selected as input. In this case, pairing mode is not released automatically. Bluetooth Function PAIRING Listening to music with the Bluetooth connection The system supports SCMS-T content protection. You can listen to a Bluetooth device that supports SCMS-T content protection. Before starting music playback, check the following: • The Bluetooth function on the Bluetooth device is on. • The pairing procedure is completed on both this system and Bluetooth device. VOL +/– (Bluetooth) 1 Place the Bluetooth device to be connected to this system within 1 meter of the system. 1 Press INPUT +/– to select “BT AU” on this system. Continued 27US 2 Start the Bluetooth connection from the Bluetooth device. [. . . ] € Delete the system from your Bluetooth device and perform pairing again (page 27). Continued 39US The remote control does not function • Point the remote control at the remote control sensor on the system. € Remove any obstacles in the path between the remote control and the system. € Replace both batteries in the remote control with new ones, if they are weak. [. . . ]