User manual HASBRO GYRUSS COLECOVISION

[. . . ] to reduce the risk of fire or electric shock , refer servicing to qualified service personnel. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] increases image sharpness and makes image dynamic. High/Middle/Low: You can adjust the contrast enhancer. off: The contrast enhancer function is not applied. Gamma Correction [GAMMA CORRECTION] Adjusts the response characteristics of the tone of the picture. Bright Produces a brighter picture overall. Select this when you watch in a bright environment, such as a living room. Select this when you watch TV programs, etc. , in a bright environment, such as a living room. Using the specified controller, “ImageDirector3” (1 page 41) allows you to adjust, set, and store a favorite tone in a computer. For details on how to use “ImageDirector3, ” refer to the Help in “ImageDirector3. Color Set this item when playing back an x. € (1 page 56) Normal: Displays a picture on the whole of the screen, maintaining the aspect ratio of the input picture. This is suitable for 16:9 or 4:3 pictures. 35:1 picture is displayed after having been changed to 16:9. This is the most suitable mode when using a commercially available anamorphic lens. Squeeze: Displays in its original aspect ratio when a 16:3 or 4:3 picture is viewed using a commercially available anamorphic lens. Full: Displays an original picture on the whole of the screen. Notes • When a computer signal is input, you can only select “Normal” and “Full. € • When the input is a 3D signal or when “2D-3D Display Sel. € in the Function menu is set to “3D”, you can only select “Normal” or “Squeeze. € 55 Over Scan Hides the edges of the picture. On: The edges of the input picture are not displayed. [. . . ] The following tables indicate those items. Color – – (fixed at “High”) – – – – – 3D signals 1080/60, 50i – – (fixed at “High”) – – – – – 1080/24P – – (fixed at “High”) – z – – z (component signal only) – – (fixed at “Full”) z 1080/60, 50P – – (fixed at “High”) – – – – – Over Scan Screen Area V Keystone – – (fixed at “Full”) – (fixed at “0”) – – (fixed at “Full”) – (fixed at “0”) – – (fixed at “Full”) – (fixed at “0”) z: Adjustable/can be set –: Not Adjustable/cannot be set *: The setting can be made for 2D display. When the projector is set to convert 2D video images to 3D video images, some items on the menus may be not available to adjust/set, depending on the “3D Format” settings on 85 the Function menu. The items that cannot be adjusted are not displayed on the menu. [. . . ]