User manual HASBRO HANDHELD MASTERMIND

[. . . ] For details, see the following section, “Indications of the Bluetooth function. ” POWER indicator (green) Lights up when the system is turned on. Flashes during battery operation if battery power is low. AUDIO IN jack Connects to the headphone jack of a portable audio device, computer, etc. , using the supplied connecting cord. DC IN 5. 2V jack Connects the supplied AC adaptor. [. . . ] Refer servicing to qualified personnel only. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug of the AC adaptor is used to disconnect the AC adaptor from the mains, connect the system to an easily accessible AC outlet. Should you notice an abnormality in the system, disconnect the main plug from AC outlet immediately. The system is not disconnected from the mains as long as it is connected to the AC outlet, even if the system itself has been turned off. On safety The nameplate indicating Sony trademark, model number and electrical rating is located on the bottom exterior of this system.  Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply. Where purchased All countries/regions Operating voltage 100 V – 240 V AC, 50/60 Hz To delete all pairing information from the system Hold the VOLUME − button and press the  INPUT/ PAIRING button for more than 5 seconds while the system is turned on. The POWER indicator (green) lights up, and the (Bluetooth) indicator (blue) flashes quickly. If a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. 2 Turn on the system. 3 Make sure the (Bluetooth) indicator (blue) on the system is off. If the (Bluetooth) indicator (blue) is on or flashing, press the INPUT button to turn it off. 4 Start playback on the connected device, then adjust the volume. Set the volume of the connected device to a moderate level, and press the VOLUME –/+ buttons on the system. Troubleshooting No sound / Sound from only one speaker / Low sound level Check that both this system and the connected device are turned on. If you are connecting a personal computer to the system, make sure the audio output setting of the computer is set for a Bluetooth device. What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Bluetooth wireless technology operates within a range of about 10 m (about 30 ft). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide. Specifications Speaker section Speaker system Enclosure type Satellite speaker: 28 mm (1 1/8 in. ) Subwoofer: 40 mm (1 5/8 in. ) Satellite speaker: closed type Subwoofer: ASW (Acoustic Super Woofer) type Amplifier section Reference output power Satellite speaker: 1. 3 W + 1. 3 W (10 % T. H. D. , 1 kHz, 8 Ω) Subwoofer: 2. 4 W (10 % T. H. D. , 100 Hz, 3 Ω) Input Stereo mini jack × 1 Communication System Bluetooth Specification version 3. 0 Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (about 30 ft)*1 Frequency band 2. 4 GHz band (2. 4000 GHz - 2. 4835 GHz) Modulation method FHSS Compatible Bluetooth Profiles*2 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) VOLUME UP/DOWN Supported Codec*3 SBC*4 Transmission range (A2DP) 20 Hz - 20, 000 Hz (Sampling frequency 44. 1 kHz) 1 * The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc. 2 * Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. *3 Codec: Audio signal compression and conversion format 4 * Subband Codec Bluetooth Turn up the volume of the system and the connected device. Pair this system and the Bluetooth device again. Communication System and Compatible Bluetooth Profiles of the system Profile is standardisation of the function for each Bluetooth device specification. [. . . ] – A microwave oven is in use near the system. – A device that generates electromagnetic radiation is in use near the system. Check that both plugs of the connecting cord (supplied) are firmly inserted into the system and the connected device. Interference from other devices Because Bluetooth devices and wireless LAN (IEEE802. 11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. – Use the system at least 10 m (about 30 ft) away from the wireless LAN device.  A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. [. . . ]