User manual HASBRO INTERACTIVE E.T. THE EXTRA-TERRESTRIAL

[. . . ] • Charge the battery pack before using for the first time. • You can charge the battery pack even if it is not completely discharged. In addition, even if the battery pack is not fully charged, you can use the partially charged capacity of the battery pack as is. • For details on the battery packs, see page 53. Table of contents Notes on recording/playback and connection • Before you start recording, make a trial recording to make sure that the camera is working correctly. [. . . ] • Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat or curved adhesive mount is securely attached to the surface. 33US Continued r Operation Search Settings Search Index Handlebar Mount (VCT-HM1) (sold separately) The Handlebar Mount is used for fixing the Waterproof Case on the handlebar of a bicycle. Insert the camera in the Waterproof Case before attaching. For details, refer to the instruction manual of the Handlebar Mount (VCT-HM1) (sold separately). Table of contents How to attach Align the tripod screw hole of the Waterproof Case with the camera mounting screw of the cradle, then secure the Waterproof Case by turning the camera mounting knob. Operation Search Camera mounting screw Settings Search m Index Camera mounting knob To adjust the angle of the mounting plate Press and hold the button on the left side of the cradle, and adjust the angle. 34US Continued r Waterproof Head Mount Kit (VCT-GM1) (sold separately) The Waterproof Head Mount Kit is used for fixing the Waterproof Case to an item you intend to use. The Kit comprises of a Goggle Mount and a Headband. Insert the camera in the Waterproof Case beforehand. Goggle Mount Buckle Table of contents Headband Operation Search Cushion Buckle lock Settings Search Tripod screw Attachment method 1 Rotate the buckle lock in the direction of 1, then, open the buckle in the direction of 2. Index 2 Insert your strap of the goggle, then return the buckle 1 and the buckle lock 2 to its closed position. The Headband of this kit can also be attached in the same way. The length of the Headband is adjustable. 3 Align the tripod screw hole in the bottom of the Waterproof Case with the tripod screw hole of the Goggle Mount, and fix firmly with the tripod screw. • Confirm that the assembly is fixed securely. • You can attach the camera in either direction. Notes • When using your own strap, use one of 40 mm or narrower width. Depending on the shape of the strap, the camera may be subjected to vibration. To prevent this, use the Headband of this kit. • Thread a suitable cord through the attachment hole of the Waterproof Case, then attach the cord to an item you intend to use with the camera. 4 Press the NEXT button on the camera to turn on. 5 Press the NEXT button to display [PLAY], then press the ENTER button. 6 Press the NEXT button to display [MP4] or [PHOTO], then press the ENTER button. Select [MP4] to play back movies, or [PHOTO] to view photos. Press the ENTER button again to stop playback. Notes • Connect the micro HDMI jack of the micro HDMI cable (sold separately) to the HDMI OUT jack of the camera. • Do not connect the output terminal of the camera to that of other devices. • Some devices may not work properly. • Use a micro HDMI cable (sold separately) with the HDMI logo. Index z To control a content being played back • Viewing the previous/next image: Press the PREV/NEXT button. • Fast-rewind/fast-forward (movies only): Press and hold the PREV/NEXT button. • Pause (movies only): Press the PREV and NEXT buttons simultaneously. If you press and hold the PREV or NEXT button during pause, slow rewind or slow forward can be performed. [. . . ] 140 min 57US Continued r Mass: Approx. 14 g (0. 5 oz) Curved Adhesive Mount Dimensions: Approx. 50. 0 mm × 16. 0 mm × 58. 5 mm (2 in. × 2 3/8 in. ) (W/H/D, excluding protrusions) Mass: Approx. [. . . ]