User manual HASBRO JURASSIC PARK 3 RE-AKA-TAK

[. . . ] Refer to the TV installation dimensions table. Dimension Table Screen center point  Unit: inches (mm) Model Name Display dimensions  84 1/4 (2, 137) **75 7/8 **(1, 926) 59 3/8 (1, 506) 50 1/2 (1, 280) 50 1/4 (1, 274) 42 1/2 (1, 077) 50 1/8 (1, 271) 42 3/8 (1, 076) 37 1/4 (943) 29 7/8 (756) 42 3/8 (1, 074) 37 1/8 (941)  44 3/4 (1, 136) Screen center dimensions  6 3/4 (171) Length for each mounting angle Angle (0°) Angle (20°)  29 5/8 (751)  5 1/8 (130)  –  –  – XBR-84X90* XBR-65HX95* XBR-55HX95* KDL-55HX85* KDL-46HX85* KDL-55HX75* KDL-46HX75* KDL-40HX75* KDL-32HX75* KDL-46EX65* KDL-40EX65* 35 1/2 (901) 30 1/2 (773) 29 5/8 (750) 25 1/4 (640) 30 (761) 25 5/8 (650) 22 3/4 (576) 18 5/8 (471) 25 5/8 (649) 22 3/4 (575) /16 (1) 2 5/8 (65) 3 1/8 (78) 5 1/4 (133) 3 1/8 (78) 5 1/4 (133) 6 3/4 (170) 6 1/2 (162) 5 1/4 (133) 6 3/4 (170) 1 18 1/4 (462) 18 1/4 (463) 18 1/8 (459) 18 1/8 (459) 18 1/2 (468) 18 1/2 (468) 18 1/2 (468) 16 1/8 (408) 18 1/2 (468) 18 1/2 (468) 4 3/8 (109) 4 1/4 (107) 3 3/4 (93) 3 3/4 (93) 4 1/4 (107) 4 1/4 (107) 4 1/4 (107) 4 1/4 (107) 4 3/8 (108) 4 1/4 (107) 15 1/4 (386) 13 3/8 (340) 12 5/8 (319) 11 1/8 (282) 13 1/4 (334) 11 3/4 (296) 10 3/4 (270) 10 (254) 11 5/8 (294) 10 5/8 (268) 33 1/2 (850) 28 3/4 (729) 27 7/8 (705) 23 3/4 (602) 27 7/8 (705) 23 3/4 (602) 21 (531) 17 1/8 (433) 23 5/8 (599) 20 7/8 (529) 19 1/8 (483) 19 1/8 (483) 18 3/4 (474) 18 3/4 (474) 18 7/8 (477) 18 7/8 (477) 18 7/8 (477) 16 5/8 (421) 18 3/4 (476) 18 3/4 (475) Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) −−  Unit: inches (mm) Model Name Display dimensions  29 3/4 (753) 29 3/4 (753)  18 5/8 (470) 18 5/8 (470) Screen center dimensions  6 1/2 (162) 6 1/2 (162) Length for each mounting angle Angle (0°) Angle (20°)  16 1/8 (408) 16 1/8 (408)  4 1/4 (107) 4 1/4 (107)  10 (252) 10 (252)  17 1/4 (438) 17 1/4 (438)  16 1/2 (419) 16 1/2 (419) KDL-32EX65* KDL-32EX55* *  n the actual model names, the “” indicates numbers and/or characters specific to each model. I **  ithout speakers W Figures in the above table may differ slightly depending on the installation. The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV’s operating instructions for its weight. CAUTION 3 4 5 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. Disconnect all the cables from the TV. [. . . ] Detach the Table-Top Stand from the TV. For XBR-84X90* only Skip this step and go to step 6 due to using the different type of stand. For other models, remove the screws shown as below illustrations. For XBR-65HX95*  Head Soft cloth Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) −−  Soft cloth For XBR-55HX95* Soft cloth For KDL-55HX85*, KDL-46HX85* Soft cloth Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) −− For KDL-55HX75*, KDL-46HX75*, KDL-40HX75*, KDL-32HX75*, KDL-46EX65*, KDL-40EX65*, KDL-32EX65*, KDL-32EX55* Soft cloth *  n the actual model names, the “” indicates numbers and/or characters specific to each model. I •  o not remove the Table-Top Stand for any reason other than to install corresponding accessories on D the TV. •  hen removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is W larger than the TV. •  o prevent damaging the surface of the TV, make sure to place a soft cloth on the work surface. T •  hen lifting or moving the TV, keep a soft cloth underneath to prevent damage. W •  he number and position of the screws on the rear of the TV differs, depending on the model of TV; be T sure to read the operating instructions of your TV. I Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) −− 7 Adjust the angle of the Mounting Hook using the hexagon wrench supplied with the Wall-Mount Bracket. For XBR-84X90* Skip this step and go to step 8. For XBR-65HX95*/ 55HX95*, KDL-55HX85*/46HX85*/55HX75*/46HX75*/ 40HX75*/32HX75*/46EX65*/40EX65*/32EX65*/32EX55* When installing the TV parallel to the wall (0 degrees), adjustment of the Mounting Hook angle (procedures  and  below) is not necessary. Make sure that each arm base X is screwed in securely.   Remove the two screws from the arm base X of the Mounting Hook. Choose the holes corresponding to the desired angle (5, 10, 15 or 20 degrees).   Adjust the angles of the top Y and bottom Z arm to fit the corresponding hole, and firmly secure each arm using the two screws removed in the previous procedure . Hexagon wrench Soft cloth *  n the actual model names, the “” indicates numbers and/or characters specific to each model. I ✍ • Be sure to adjust the right and left arms to the same angle. • Make sure that the two arm bases are screwed in securely. [. . . ] • Make sure that the two arm bases are screwed in securely. Be careful not to pinch your fingers when adjusting the angle of the Mounting Hook. CAUTION 8 Install the TV on the wall. For XBR-84X90* only Detach the stand from the TV before installing it on the wall. Refer to your TV’s operating instructions for detaching the stand. *  n the actual model names, the “” indicates numbers and/or characters specific to each model. [. . . ]