User manual HASBRO LAZER TAG TEAM OPS ACCESSORY KIT

[. . . ] Please be sure to read and follow all instructions carefully before using this product. NOTE: Both the VIRTUAL SCOPE and THUNDER PACK work with any LAZER TAG TAGGER. TIGER recommends ENERGIZER batteries for optimum performance. VIRTUAL SCOPE Requires 2 x 1. 5V "AAA" or LR03 size alkaline batteries (not included). [. . . ] RECHARGEABLE BATTERIES: Do not mix these with any other types of battery. Always remove from the product before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES. As with all small items, these batteries should be kept away from children. If swallowed, seek medical attention immediately. VIRTUAL SCOPE GREEN LED LIGHT VIEWFINDER/ CROSSHAIRS TARGETING LIGHT BEAM ON/OFF DIAL TRACK ON TOP OF TAGGER BASE OF TAGGER TRACK ON SIDE OF TAGGER THUNDER PACK THUNDER PACK PORT ATTACHMENT SCREW HUD [HEADS UP DISPLAY] PORT TO ATTACH AND USE THE VIRTUAL SCOPE WITH ANY LAZER TAG TAGGER 1. Slide VIRTUAL SCOPE fully onto the track located on the top or on the side of TAGGER. Rotate ON/OFF DIAL counterclockwise, to the "On" position. Green LED Light will project a light beam onto the center of the crosshairs. Use the virtual green dot and crosshairs to line up your target. To remove the VIRTUAL SCOPE, simply slide it off the TAGGER. NOTE: Please remember to turn the ON/OFF switch to the OFF position when you are not playing LAZER TAG, in order to conserve battery life. VIRTUAL SCOPE ON/OFF DIAL VIRTUAL GREEN DOT AND CROSSHAIRS TO ATTACH AND USE THE THUNDER PACK WITH ANY LAZER TAG TAGGER 1. Align THUNDER PACK accessory to base of TAGGER as shown. [. . . ] Lazer Tag is a trademark of Shoot the Moon Products and used with permission. Energizer, Energizer MAX and other marks are trademarks of Eveready Battery Company, Inc. [. . . ]