User manual HASBRO MARY POPPINS CAROUSEL GAME

[. . . ] 14  LDAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  Server Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Each function is described in detail. 2 Gigabyte Content Management System Key Features and Functions  Support IPMI v2. 0  Out-of-band monitoring and control for sever management over LAN.  FRU information report includes main board part number, product name, and manufacturer, etc. )  Health status/Hardware monitoring report.  Event notification via PET (Platform Event Trap).  Platform Event Filtering (PEF) to take selected action for selected events.  Chassis management includes power control and status report, front panel buttons and LEDs control.  Support multi-session user, and alert destination for LAN channel. 3 Using the Web UI The BMC firmware features an embedded web server, enabling users to connect to the BMC using an Internet browser (Microsoft® Internet Explorer™). The web server shall support 4 concurrent connections Web-based GUI is supported on the following browsers: Microsoft Windows: • Internet Explorer 6 and 7 • Mozilla® Firefox® 2. 0 or later Linux: Mozilla Firefox 2. 0 or later 4 Gigabyte Content Management System Console Overview 1. 3. Open a web browser and type in your identified IP. The IP address can be found using your DHCP server. A dialog box prompts you to enter Username and Password. Enter the following values: Username: admin Password: password The default user name and password are in lower-case characters. When you log in using the root user name and password, you have full administrative powers. An Administrator can even execute configuration commands that would disable the channel that the Administrator is communicating over. 11 IPMI Settings IPMI Settings provides remote configuration over LAN. To activate IPMI remote configuration by LAN, check Enable IPMI Over LAN option, define the Channel Privilege Level Limit, and enter the Encryption Key. When you finish the configuration, click “Apply Changes”. 12 Time Setting This page provides the mechanism to configure the Network Time acquisition method. With Administrator or Operator privilege level, you can modify configuration settings and click the Apply Changes button to execute the settings, as well as click the Sync Time Now button (when in Requested Mode) to request an immediate clock set. You can Disable NTP, set Requested Mode, or Daemon Mode in this parameter. In Requested Mode, you can request an immediate clock synchronization with the NTP server; request will be sent when click the Sync Time Now button. The Daemon Mode runs NTP daemon which sends a NTP request at approximately 5 minute intervals. Multiple NTP servers may be specified to provide redundancy. Time Synchronization Method Specifies the synchronization method for Requested Mode. Select Slew mode when you want to adjust the time smoothly over time if there are time sensitive applications in place. Select Step mode to aggressively change the time using settimeofday() system call. 13 Sessions This screen displays information on Active Sessions. [. . . ] For each PEF, you can choose the action to be taken when a platform event occurs. You can also choose to generate and send an alert when a platform event occurs. In the Platform Events screen, you can enable the generation of platform event alerts globally by clicking Global Alerting Enable. When you finish the configuration, click Apply Changes. 23 Trap Settings In the Trap Settings, user can set the IPv4 and Ipv6 Destination List. [. . . ]