User manual HASBRO MONKEY MADNESS

[. . . ] > Use only the power adapter supplied, as indicated on the rear of the base. Use only the cables supplied for fixed line and LAN connection and connect these to the intended port only. > Use only rechargeable batteries that correspond to the specification (see enclosed CD), as this could otherwise result in significant health risks and personal injury. > Insert rechargeable batteries with the correct polarity and use them in accordance with the user guide (polarity symbols are displayed in or on the handset battery compartment). [. . . ] 6 Connecting the PC to the router (optional) You can change the settings on the phone's base using a PC connected to your phone via the router. > Connect the PC network connection to a free LAN socket on your router. The procedure below requires that your phone is automatically assigned an IP address by the router (i. If DHCP is not enabled on the router) you will have to assign a static IP address to the base for LAN access. You must enter this IP address on the handset before carrying out the following steps. Further information on this can be found in the long user guide (see enclosed CD). The following handset menu can be used to make the entry: v (Press right on the control key) ¢ Ï ¢ System ¢ Local Network ¢ (enter system PIN if required) Version 5, 23. Fm / 4/20/11 Configuring the VoIP connection Instead of using the following procedure, you can also enter the VoIP access data and the assignment of the VoIP connection as send and receive connection using your PC (steps 7 to 12 ): > Launch the web browser on your PC. Com in the address field of the web browser and press the return key. You are connected to your base's Web configurator. To log in to the Web configurator you will need the system PIN for the telephone (default setting: 0000). Otherwise, for more information, see 10 . If you have received a registration name/password and, if applicable, a user name: IP Wizard If you have received an auto-configuration code: ?Do you have a code for auto configuration?> Press the key below §Yes§ on the display screen. > Press the key below §No§ on the display screen. No If your phone cannot establish a connection to the Internet, the message Internet connection not available is displayed. > Press the left display key §Info§ to display information about the possible causes of errors. > Press the right display key §OK§ to end the VoIP wizard and start the connection assistant (step Version 5, 23. Fm / 4/20/11 Configuring the VoIP connection 9 Entering an auto-configuration code > Enter your auto-configuration code using the keypad IP Wizard Activation code for autoconfiguration: (max. > Press the right-hand display key §OK§. All data required for VoIP telephony is loaded directly from the Internet to your phone. [. . . ] You will see the following display: Own Details Your Gigaset. Net nickname: Gi > Using the number keys, enter the name that you would like to be listed under in the Gigaset. Abc > Press the right display key §Save§. <C Save If an entry already exists with this name, the message "Nickname already exists. [. . . ]