User manual HASBRO MONOPOLY 41596 PLUS 6 CLASSIC GAMES 2003

[. . . ] a Gigaset ZX410. Wall mounting Drill two holes into the wall at a distance of 12. 4 cm and fix two screws. Lift out the handset bracket (6) with a screwdriver and clip it into the handset cradle (7). Hang the telephone on the projecting screw heads. First use 1 Lift the handset for 5 seconds and place it back in the cradle. You will hear the free tone and the device is now ready to be used. [. . . ] q Select Delete entry or Delete all and confirm with [. [ Press the control key to confirm the action. Edit entry M ¢ Phonebook The first list entry is displayed. q Select the entry and open context menu with [. appears in the display. Opening phonebook Z In standby: Press the control key s. de en fr nl 1110-01 9 Gigaset DA710 / en / A30350-M213-R101-1-7W19 / telephony. fm / 25. 11. 2011 Either: save in phonebook [ Confirm the saving of the entry in the Phonebook. q Select VIP mode (On / Off) and confirm with [. Or: save to a direct dial key B/L B Press the desired direct dial key. The notice Saved appears in the display. or M ¢ Redial Transferring a number from the redial list to the phonebook/ direct dial key Call list (CLIP) Incoming calls are saved if the number is transmitted ( page 13). If the number is the same, only the last incoming call is saved. The oldest call is automatically deleted when there are more than 50 calls. If the caller is saved to the phonebook or to a direct dial key, the name is also displayed. You can use the call list for the following functions: Calling a number from the list ( page 7). Empty is displayed when the storage is empty. If the key is already assigned you will see the saved number. For long numbers (more than 16 digits) switch between the display of digits 1-16 and 17-32 with the control key q. B/L B Y Delete entry / Delete all q q [ Open the call list. Select the entry and open context menu with [. Select Delete entry or Delete all and confirm with [. Press the control key to confirm the action. [ New entry Switch to the entry mode with [. Last number redial list The last five numbers called are automatically saved (each a max. of 32 digits). Changing the allocation [ Open the context menu with [. q Select Edit entry and confirm with [. Opening the last number redial list I Press the redial key. ~ ~ Enter/change number and name Enter/change number and confirm with [. Enter/change name and confirm with [. 10 1110-01 de en fr nl Gigaset DA710 / en / A30350-M213-R101-1-7W19 / telephony. fm / 25. 11. 2011 [ Press the control key to save the entry. q Delete entry / Delete all B/L B q [ Press the direct dial key the entry of which is to be deleted and open the context menu with [. Select Delete entry or Delete all and confirm with [. Press the control key to confirm the action. [ Select the required setting and confirm with [. [. . . ] ISO 14001 (Environment): Certified since September 2007 by TüV SÜD Management Service GmbH. ISO 9001 (Quality): Certified since 17/02/1994 by TüV SÜD Management Service GmbH. Contacts If you should encounter any problems when operating the telephone connected to a communication system with analogue network access, please contact the network operator responsible or your dealer. Disposal All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/E. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. [. . . ]