User manual HASBRO MONOPOLY 60TH ANNIVERSARY EDITION023

[. . . ] You will hear the free tone and the device is now ready to be used. Please note: The phone is connected to the power source via the phone line. if the PABX is switched off at night), the above mentioned steps need to be repeated. Phonebook entries and speed dialling destinations are stored indefinitely. The device is designed to be used as a single-line system (on the main extension or a telephone system). [. . . ] q Select the desired entry in the list and press [. Storing the speed dial entry K Press the set key or [. Y You can open the call list in idle mode or when the handset is lifted. Press the control key t. Notes Viewing an entry Select an entry. If the number and name are available the name is shown first. To view the number: # Press the hash key. Use this key to switch between the number and name display. q When storing speed dial numbers, please note the following: u * and # are saved regardless of the set dialling mode but are only dialled with tone dialling mode ( page 11). u If the number entered is longer than 32 digits, only the first 32 digits are stored. A single speed dial number cannot be deleted but only overwritten. £ Y Transferring a number from the call list to the phonebook q q ~ ~ Y Open the call list. Select the entry and open the context menu with [. Change the number (if required) and confirm with [. Enter or edit the name and confirm with [. D / E Increase or decrease the volume for the ringer. Press the key code for the desired date format: Q for MM/DD e. g. 12/31 for 31 December K Save your settings and exit the setting mode. Setting the time format £ K Activate setting mode. 5 Q Press the key code for setting the time format. Press the key for the desired time format: 12-hour format K 2 24-hour format or Save your settings and exit the setting mode. Q . . . 4 Select the desired value using the number keys. K Press the set key or [ to save your settings and exit the setting mode. Setting the handset volume The handset volume can be set using the setting mode or changed directly during the telephone conversation using the keys ( page 7). K O Activate setting mode for the handset volume. Press the key code for the desired volume: low 2 medium 3 high £ K Changing the ring tone K M Activate setting mode for the ring tone. If you lift the handset, you will hear the currently set ring tone. K Press the set key or [ to save your settings and exit the setting mode. Note The ring tone can only sound perfectly when the ring pulse arriving from the telephone network is long enough. The length of the pulses may differ from network to network. [. . . ] Do not use solvents or microfibre cloths. Never use a dry cloth; this can cause static. Disposal All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. [. . . ]