User manual HASBRO MONOPOLY 70TH ANNIVERSARY EDITION

[. . . ] Headsets of other manufacturers could possibly emit a very loud and harmful acoustic signal due to implementation differences. u Lay the connecting lead where it will not cause accidents. u Position the telephone on a nonslip surface. u For your safety and protection, the telephone may not be used in the bath or shower rooms (wet locations). [. . . ] Press the repertory key. B Speed dialling You can save 4 numbers on the repertory keys and 10 numbers for speed dial on the number keys (0. . . O K& Notes Storing a number cK Lift the handset, press the set key. Press the speed dial key and then the speed dial number. Press the set key, hang up the handset. either . . . via repertory key B Press the repertory key. O Press the speed dial key and then choose a speed dial number. Then Enter the phone number for the repertory key or speed dial. You can now store further numbers by pressing the repertory or speed dial key sequence again and repeating the process. K & Press the set key, hang up the handset. ~ When storing and deleting repertory and speed dial numbers, please note the following: u You can also save the number of the person you are talking to during a call. u * and # are saved regardless of the set dialling mode but are only dialled with tone dialling mode ( page 6). u If the number entered is longer than 32 digits, only the first 32 digits are stored. £ Dialling pauses One or more dialling pauses can be entered using I (not at 1st digit). Pauses are transferred to the memory and are necessary for certain extension systems (e. g. K & Press the set key, hang up the handset. You can also change the ringer volume during ringing by using the E / D keys. cK Operation on a PABX Special functions/Recall key During an external call, you can make an enquiry or forward the call. The subsequent procedure depends on your PABX. To set the recall key, the telephone’s flash time must be set consistent with your PABX. Please refer to the operating instructions for your PABX. Setting the ringer melody Lift the handset, press the set key. O Press one of the number keys to select a melody. K & Press the set key, hang up the handset. You can also change the ringer melody during ringing by using the number keys (0 . . . Note: The length of the playable ring tone depends on the duration of the signal voltage in your telephone network. This can differ depending on cK Changing the dialling mode/ flash time The telephone supports the following dialling modes: u Tone dialling u Pulse dialling Depending on your PABX, you may need to change your telephone’s dialling mode or the flash time. Gigaset DA410 /RU en / A30054-M6529-S301-2-9U19 / DA410_en. fm / 03. 01. 2012 7 en Changing the dialling mode cK # /2 K& Lift the handset, press the set key. Press the set key, hang up the handset. Operation on public telephone systems Public telephone systems – in some cases by special request – offer you a range of useful additional services (e. g. [. . . ] slow flashing fast flashing deactivated 1. 5 : 1 2:1 85 / 85 ms 85 / 110 ms 85 / 140 ms 110 / 110 ms 70 / 70 ms 90 ms 120 ms 270 ms 375 ms 600 ms 100 ms Sets or deactivates LED call indication 1 32 1 1 91 92 Sets the pulse ratio for pulse dialling Sets the signal time / signal pause for tone dialling 1 95 Sets the flash time for tone dialling 5 6 9 # 0–4 0–9 1–3 1 2 Sets the ringer volume, 5 levels Sets the ringer melody, 10 melodies Sets the volume on the handset, 3 levels Tone dialling Pulse dialling Sets the dialling mode Gigaset DA410 /RU en / A30054-M6529-S301-2-9U19 / DA410_en. fm / 03. 01. 2012 9 en Appendix Care Wipe the unit with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths. Never use a dry cloth; this can cause static. Environment Our environmental statement We at Gigaset Communications GmbH are aware of our social responsibility. That is why we actively take steps to create a better world. [. . . ]