User manual HASBRO MONOPOLY JR DIG 39N DINOS

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Select using [] and [OK]: Edit entry Immediately, On busy or On no reply. Enter the required destination call number and confirm with [ Select using [] and [OK]: Save entry. Confirm the prompt with [YES]: Call forwarding is activated. Confirm the prompt with [NO]: Call forwarding is not activated. Step ' ']. Deleting external call forwarding 1. Select using [] and [OK]: Service Set up Ext. Select using [] and [ ']: (required call forwarding). Select using [] and [OK]: Delete entry. Switching internal/external call forwarding Calls can be forwarded by the base station (internal) or by the provider (external). In the case of internal call forwarding, the second B- channel is used. You can only switch to another call forwarding when call forwarding is not active. Select using [] and [OK]: Service Set up Settings ISDN settings Int. forwarding or Ext. Call Forw. Transferring incoming calls - CD (Call Deflection) With CD you can transfer an incoming call to another call number while it is ringing. See also page 36. Transferring incoming external calls manually You receive an external call. You can conduct an internal enquiry call. As soon as the internal subscriber ends the enquiry call, [BACK] appears on the display for 10 seconds. Pressing [BACK] reconnects you to the external caller. If this option is not used, the ring tone sounds again after 10 seconds. To end the internal call, press for the menu and select [End] followed by [OK]. You are then returned to the external call and the internal subscriber hears the busy tone. Step 2. or 2. Putting internal subscribers on hold You are conducting an internal call. Press [CONSULT]: The internal subscriber is put on hold. You can set up an external enquiry call. To end the external call, press for the menu and select [End] followed by [OK]. You are then returned to the internal call and the external connection is closed. To set up a three-party conference, press [CONF This establishes the confer. ]. [. . . ] Information on new products and updates and support for Gigaset 3070/75isdn and Gigaset talk&surf is available on the Internet at the following address: http://www. siemens. com/ic/products/cd/english/index/support/index. html. Step Approval Gigaset 3070/75isdn and Gigaset talk&surf are designed for operation in your country as indicated on the underside of the unit. Special country-specific features have been taken into consideration. If you have any queries with regard to differences in public telephone networks, please contact your dealer or operator. Unit compliance with the basic requirements of the terminal directive is confirmed by the CE symbol. We, Siemens AG, declare, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH with the registration number "Q810820M" in compliance with ANNEX V of the R&TTE-Directive 99/05/EC. [. . . ]