User manual HASBRO MONOPOLY LORD OF THE RINGS

[. . . ] 2 On/off key: switch answering machine on and off. Lights up: answering machine is activated. Flashes: message is being played back or recorded. 3 Volume keys: (?= quieter; + = louder. ) During message playback: adjust the speaking volume. [. . . ] After recording, the announcement is played back for you to check. Please note u Your recording is ended automatically: ?If the maximum message length of 170 seconds is reached or ?If there is a pause lasting for longer than 2 seconds. u If you cancel the recording, the pre-recorded announcement is used. u The recording is cancelled if the answering machine memory is full. Version 5, 03. 04. 2011 34 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine Playing back an announcement Menu q Voice Mail OK q Announcements OK q Play announce OK The list is displayed as follows: VoiceMail 01+02 Number of new messages + number of old, played back messages. OK Press the display key to If you have not recorded your own announcement, the pre-recorded announcement will be played. Deleting your personal announcement Menu q Voice Mail OK q Announcements OK q Del announce OK The pre-recorded announcement is used again after a personal announcement is deleted. Playing back messages There are three ways to start playing back messages on the answering machine. u Start message playback via the Voice Mail menu: Menu q Voice Mail OK q Play Messages OK If you have entered a number for the network mailbox you still need to select the answering machine: q Answ. OK u Start message playback via the answering machine list: ? q VoiceMail (see also page 32) Version 5, 03. 04. 2011 open the list. u Fast access to the answering machine: To access the answering machine, simply press and hold the 1 key ?36 Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine Accepting a call from the answering machine You can still accept a call even when the answering machine has answered a call or is recording: Menu Accept OK If Call Screening has been deactivated via the handset (see following section "Activating/deactivating call screening") or if Call Screening is activated meaning the call cannot be heard on the handset, you can still accept the call by following these steps: u Press the talk key c u Remove the handset from the base/charger (if auto answer is activated, page 46) Please note If Call Screening is activated via the handset and the call can be heard on the handset, you can switch the speaker on and off by pressing the talk key c. Recording stops and you can speak to the caller. If three seconds of the call have already been recorded when you pick it up, the call will be displayed as a new message. Permanently activating/ deactivating call screening Menu q Voice Mail OK q Call Screening OK q Handset /Base OK (?= on) Call screening can be simultaneously activated on the base and handset. Deactivating call screening on the handset for the current recording a Press the end call key. The loudspeaker on the handset is deactivated. Setting up the answering machine The answering machine has already been preset at the factory. You can configure individual settings via the handset. Setting up ring delay You can set the amount of time that elapses before the answering machine is to accept a call. Menu q Voice Mail OK q Ring Delay OK Select Immediately / 10 sec / 18 sec / 30 sec / Auto and press OK (?= on). With Auto the ring delay is as follows: u If there are no new messages, the answering machine answers a call after 18 seconds. 37 q Activating/deactivating call screening Version 5, 03. 04. 2011 While the caller is leaving a message on the answering machine, you can listen in via the loudspeaker on the base or handset. Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / answering_m. fm / 04. 04. 2012 Operating the answering machine u If new messages are present, the answering machine answers a call after 10 seconds. You can now operate the answering machine using the keypad. Please note The connection is terminated: u When an incorrect system PIN is entered u After playing back the message(s) Operating the answering machine via the keypad The answering machine is operated using the following keys: A During the number/date/time announcement: Skip to the start of the previous message. During message playback: Skip to the start of the current message. [. . . ] Standard characters 1 1 $ 2 a b c 2 I d e f 3 4 g h i 4 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x Writing and editing names The following rules apply when writing names: u Each key between Q and O is assigned several letters and characters. u Characters are inserted at the cursor position. u Press the display key to delete the character to the left of the cursor. u The first letter of the name is automatically capitalised and then followed by lower case letters. 5 j k l 5 L m n o 6 M p q r s 7 N t u v 8 O w x y z 9 Q 1) . [. . . ]