User manual HASBRO MONOPOLY MILLENIUM

[. . . ] 2007 Safety Safety This device is used exclusively for receiving, recording and replaying DVB signals. Please read the following information carefully to ensure safe usage. Schablone 2005_06_16 Safety Precautions u Only use the cables supplied or authorised accessories, as indicated in this manual, for connecting the device. U Do not connect the device during a storm to avoid the risk of electric shock. [. . . ] 2007 TV operation Following the scanning procedure a dialog informs you on the completion of the search. Specify whether the found channels should add to the current channel list or replace the former list or whether you want the newly detected channels to be discarded. Once makes you quit the scan menu and return to the overview. TV operation Adjusting the antenna On principle, an antenna being stationed nearby a window will effect the most optimal reception. Find the ideal position for your antenna: … > Technical Information > Channel Information You are displayed the current channel's channel information. Try out different positions of your antenna, until the display for Signal Quality shows its maximum value (100%) or some value similarly high. Note: Please mind that depending on your type of antenna the antenna's orientation may be of importance as well. If this is the case, swing your antenna around to see whether this influences the quality of the signal. Refer to your antenna's operating instructions to find out if your device owns omnidirectional qualities. Afterwards, use the channel buttons your antenna's position, if appropriate. Feeling content with the reception quality set, press information and complete the process. Note: "Timer programmes" are marked by a small alarm clock icon being displayed besides the title of the respective programme. editing the timer list … > Timer Deleting programmes 1. In the timer list select the desired programme. Press the respective colour button and confirm the deleting: red: deletes the selected programme yellow: all programmes are deleted. In the timer list select a programme and confirm your selection. Alter the settings for date, time (starting and end time) and cycle (interesting for series and regularly recurring programmes): Repeatedly select one setting and modify it using the numerical buttons. Then highlight OK besides Apply and confirm your settings. Switching off current timer functions When watching a timer programme only few buttons can be activated, i. During this time the OSD is also not available. Controls, For switching off the current timer functions: O ƒ ˆ volume ì Press A on your remote control and press the button again. 2007 Settings Radio operation The antenna connection of your set-top box enables for reception of radio programmes. [. . . ] Highlight the channel intended for shifting and confirm your selection. Move the chosen channel to its new position as desired by means of the arrow buttons and confirm to store the channel at the desired place. Filtering channels By means of this function, you can display the channel list according to desired criteria. Note: A filter is always temporary, thus not being stored. [. . . ]