User manual HASBRO MONOPOLY STAR WARS TRILOGY

[. . . ] 4 Skip to next message (press once) or next message but one (press twice). 5 Skip back to beginning of message (press once) or to previous message (press twice). 7 Adjust volume during message playback: = quieter; = louder. While an external call is being signalled: adjust ringer tone volume. Gigaset C385 base station Please note: u If the answer machine is being oper- 2 6 5 1 4 3 ated from a handset or if it is recording a message, it cannot be operated from the base station. [. . . ] Your SMS messages are sent via the SMS centre that is entered as the active send service centre. However, you can activate any other SMS centre as the active send service centre to send a current message ( page 34). If no SMS service centre is entered, the SMS menu only contains the entry Settings. Information on writing an SMS can be found in the appendix ( page 55). An SMS may contain up to 160 characters. u Your network provider supports SMS in Writing/sending an SMS ~ Menu Write an SMS. s/~ Enter the number with area code (including your local area code) from the directory or key it in manually, and press OK. The SMS is sent. u If you are interrupted by an external SMS Write Message Please note Please note: u If your phone is connected to a PABX, please read page 34. u To receive SMS messages you must be registered with your service provider. call while writing an SMS, the text is automatically saved in the draft message list. u If the memory is full, or if the SMS function on the base station is being used by another handset, the operation is cancelled. An appropriate message appears in the display. Delete SMS messages you no longer require or send the SMS later. 31 SMS (text messages) Draft message list You can save an SMS in the draft message list, and edit and send it later. Deleting draft message list Open the draft message list. Menu Delete List OK Saving an SMS in the draft message list Write an SMS ( page 31). by sending an SMS to your own number: once with and once without the access code. u When you send SMS messages, your sender number may be sent without your extension number. In this case the recipient cannot reply to you directly. Sending and receiving SMS messages on ISDN PABXs is only possible via the MSN number assigned to your base station. u You can only receive an SMS when the and special functions offered by your service provider before you make a new application and before you delete preconfigured phone numbers. Menu SMS Settings Service Centres q Select an SMS centre (e. g. You have the following options: Active Send Srvc. If the SMS messages are to be sent through this SMS centre, press OK to activate the SMS centre ( = on). If a different SMS centre was active previously, then this will be deactivated. For the SMS centres 2 and 3, the setting only applies to the next SMS. SMS Centre No Enter the number of the SMS centre and press OK. You should find out about the services Activating/deactivating SMS function The SMS function is active by default. If you deactivate the SMS function, you cannot send or receive any SMS messages with your phone. [. . . ] You may have to enter the system PIN into the base station when manually registering a handset. You can choose between five volumes and the "crescendo" ring, page 45. Select "0" to deactivate the base station ringer. u Ringer tones: You can set a ringer melody for external calls, page 45. Menu Settings Base Audio Settings Ringer Volume / Ringer Melody For how to adjust the settings, page 45. Repeater support With a repeater you can increase the range and reception strength of your base station. [. . . ]