User manual HASBRO MONOPOLY024

[. . . ] 10 Microphone 11 Intercom/Hold/Conference key Set up an internal call (page 23). Switch between external call and internal handset (page 25), or transfer a call during external call (page 24). Set up a conference call with an external line and an internal handset (press and hold in hold-intercom mode, page 25). 1 2 3 4 Note: 7 12 11 10 8 9 When only one handset is registered to the base station, the key is redundant and therefore has no function. 12 Star (*) key Ring tone on/off (press and hold) Switch temporarily to tone dialing (DTMF). [. . . ] ¤ Press §OK§ to end the recording. Recording ends automatically if the maximum recording time of 3 minutes has been exceeded. Toll-Saver Mode ­ Call acceptance/ charge saving function for remote operation You can set when you want the answering machine to respond to calls. The options are: 2 Rings, 4 Rings, 6 Rings, 8 Rings, as well as the cost-saving setting Toll Saver. Note: The number of rings refers to the ring tones of the base station. If you have selected another ring tone, the number of rings you hear may differ from the selected number of ring tones. 20 Operating the answering machine When Toll Saver is set, the following determines when the answering machine accepts calls: u If no new messages are present, the answering machine accepts calls after 4 Rings. u If new messages are present, the answering machine accepts calls after 2 Rings. When operating remotely, you know there are no new messages when you hear the third ring (otherwise the answering machine would have already accepted your call). There will be no call charges if you hang up now. §Menu§ ¢ Answer Machine ¢ Settings ¢ Ring Delay 2 Rings / 4 Rings / 6 Rings / 8 Rings / Toll Saver Select an option and press §OK§. Activating Remote Access §Menu§ ¢ Answer Machine ¢ Settings ¢ Remote Access On / Off Select and press §OK§ to confirm your selection. Calling the answering machine and playing back messages ~ ;~ Dial your own number. While listening to your announcement, press the ; key and enter the system PIN (default setting: 0000, see page 27). You will be informed whether any new messages have been recorded. You can now operate the answering machine using the keypad. Changing the language of voice prompts and prerecorded announcements You can select English, Spanish, or French as the language of voice prompts and prerecorded announcements. Your answering machine is now deactivated. ~ ;~ 22 Using several handsets Using several handsets Registering handsets You can register up to a total of six handsets with your base station. A Gigaset A18H handset can be registered with up to four base stations. §OK§ Press the display key to confirm deletion. Locating a handset ("paging") You can locate your handset using the base station. ¤ Press the Registration/Paging key ÷ on the base station briefly. ¤ All handsets will ring at the same time ("paging"), even if the ring tones are switched off. On individual handsets you can press the display key §Quiet§ to mute the ring tone. Note: The base station and supplied handsets are pre-registered at the factory. Registering Gigaset A18H handset On the handset §Menu§ ¢ Settings ¢ Registration ¢ Register HS q Select the base you want to register your handset with and press §OK§. Bases that have been registered will be marked by ½. ~ Enter your PIN and press §OK§ (default setting: 0000, see page 27). The handset will be registered. Ending paging ¤ Briefly press the Registration/Paging key on the base station ÷ or press any key on the handset. Changing the base station If your handset is registered to more than one base station, you can set it to a particular base station or to the base station that has the best reception (Best Base). §Menu§ ¢ Settings ¢ Registration ¢ Select Base q Select one of the registered base stations or Best Base and press §OK§. On the base station Within 60 seconds press and hold the registration/page key ÷ (for about 5 seconds) on the base station (see page 2). De-registering handsets You can de-register any registered handset from your Gigaset A180/Gigaset A185. On a handset: §Menu§ ¢ Settings ¢ Registration ¢ Unregister HS ~ Enter your PIN and press §OK§ (default setting: 0000, see page 27). [. . . ] THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE. 35 Appendix If this Product was purchased in the United States of America this limited warranty will be governed by the laws of Texas, and exclude the United Nations Convention on Contracts for the International Sale of Goods. If this Product was purchased in Canada this limited warranty will be governed by the laws of the Province of Ontario and the federal laws of Canada applicable therein, and exclude the United Nations Convention on Contracts for the International Sale of Goods. If you want to learn more about Gigaset Service or for Support on your Gigaset phone, visit our web site at http://www. gigaset. com or please call 1-866-247-8758. Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a licensee of the Siemens trademark. [. . . ]