User manual HASBRO MUSICAL MOONBEAM

[. . . ] The product image used in the following pictures for your reference may look different from the actual product. Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. · Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. · Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. [. . . ] No Signal OSD Select whether to display a message when there is no input signal. MDC OSD Select whether to display a message when settings are changed by the MDC. Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time: Set the time to power on the selected display device. Off Time: Set the time to power off the selected display device. Volume: Specify the volume of the display device when it is powered on by On Time. Source: Specify the input source of the display device when it is powered on by On Time. Holiday: The Holiday Management settings can be applied to the Timer. Repeat : Specify the period for which you want to repeat the selected Timer. Once: Activate the timer only one time. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat: Activate the timer on Saturdays and Sundays. Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision. Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu. ) For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99. 3. The display you want to control does not appear on the other Control Info Grids. The following message appears repeatedly. Check that the display is powered on. (See the power status in the system information chart. ) Ensure you select the input source the display is connected to. Check that the display you want to control is selected. Displays power on or off at different time from one another even though On Time or Off Time is set. The remote control does not work. Adjust the time on the PC to synchronize the time between the connected displays. The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote Control function is Disable. To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. How display properties are shown when multiple displays are used 1 2 3 4 When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. [. . . ] The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. [. . . ]