User manual HASBRO MUSIQUE ET LUMIERES SIEGE TOUPIE-SIT N SPIN FRENCH

[. . . ] Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. An administration fee may be charged if either (a) an engineer is called out at your request and there is no defect in the product (i. e. where you have failed to read this user manual). (b) you bring the unit to a repair center and there is no defect in the product (i. e. [. . . ] The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC. If multiple source devices are connected to the PC, the many cables around the PC may look messy. Connecting the devices directly to the product will resolve such inconvenience. An external mass-storage HDD requires external power supply. Be sure to connect it to a power source. 2 Connecting and Using a Source Device 38 2 2. 5 Connecting and Using a Source Device Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a "click. " Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power cable to the power socket. - Removing the DC power adapter To remove the DC power adapter, lift it outwards from the bottom as shown in the image. When using the adapter without fixing it to the back of the monitor, the adapter jack can easily get disconnected or the cable may break. Be sure to securely fix the adapter in the groove. 2 Connecting and Using a Source Device 39 3 3. 1 Screen Setup Configure the screen settings such as brightness and color tone. MAGIC This feature optimizes the brightness and colors according to how the product will be used. 3. 1. 1 HASBRO MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. HASBRO This menu is not available when MAGICColor is in Full or Intelligent mode. This menu is not available when Eco Light Sensor or Eco Saving is set to On. HASBRO Configuring MAGICBright 1 2 3 4 Press [ Press [ Press [ Press [ ] on the product. ] to move to PICTURE and press [ ] to move to MAGIC and press [ HASBRO ] to move to MAGICBright and press [ ] on the product. ] on the product. The following screen will appear. MAGIC HASBRO MAGIC Bright HASBRO MAGIC Color Custom Standard Game Cinema Dynamic Contrast Custom: Customize the contrast and brightness as required. Standard: Obtain a picture quality suitable for editing documents or using Internet. Game: Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic movements. Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. This menu is not available when MAGICBright is set to Cinema or Dynamic Contrast mode. Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. HASBRO This menu is not available when MAGICColor is in Full or Intelligent mode. 4. 1. 1 Configuring Red 1 2 3 Press [ Press [ Press [ ] on the product. ] to move to COLOR and press [ ] to move to Red and press [ COLOR Red Green Blue Color Tone Gamma Normal Mode1 50 50 50 ] on the product. The following screen will appear. 4 Adjust the Red using the [ ] buttons. 4 Configuring Tint 47 4 4. 2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. HASBRO This menu is not available when MAGICColor is in Full or Intelligent mode. 4. 2. 1 Configuring Green 1 2 3 Press [ Press [ Press [ ] on the product. ] to move to COLOR and press [ ] to move to Green and press [ COLOR Red Green Blue Color Tone Gamma Normal Mode1 50 50 50 ] on the product. The following screen will appear. 4 Adjust the Green using the [ ] buttons. 4 Configuring Tint 48 4 4. 3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. HASBRO This menu is not available when MAGICColor is in Full or Intelligent mode. 4. 3. 1 Configuring Blue 1 2 3 Press [ Press [ Press [ ] on the product. ] to move to COLOR and press [ ] to move to Blue and press [ COLOR Red Green Blue Color Tone Gamma Normal Mode1 50 50 50 ] on the product. The following screen will appear. 4 Adjust the Blue using the [ ] buttons. 4 Configuring Tint 49 4 4. 4 Configuring Tint Color Tone Adjust the general color tone of the picture. HASBRO This menu is not available when MAGICColor is in Full or Intelligent mode. 4. 4. 1 Configuring the Color Tone Settings 1 2 3 Press [ Press [ Press [ ] on the product. ] to move to COLOR and press [ ] to move to Color Tone and press [ ] on the product. [. . . ] In such a case, change the settings according to the following table by referring to the graphics card user manual. Horizontal Frequency (kHz) 31. 469 31. 469 35. 000 49. 726 68. 681 31. 469 37. 861 37. 500 35. 156 37. 879 48. 077 46. 875 48. 363 56. 476 60. 023 67. 500 49. 702 60. 000 63. 981 79. 976 55. 935 Vertical Frequency (Hz) 70. 086 70. 087 66. 667 74. 551 75. 062 59. 940 72. 809 75. 000 56. 250 60. 317 72. 188 75. 000 60. 004 70. 069 75. 029 75. 000 59. 810 60. 000 60. 020 75. 025 59. 887 Resolution Pixel Clock (MHz) 25. 175 28. 322 30. 240 57. 284 100. 000 25. 175 31. 500 31. 500 36. 000 40. 000 50. 000 49. 500 65. 000 75. 000 78. 750 108. 000 83. 500 108. 000 108. 000 135. 000 106. 500 Sync Polarity (H/V) +/-/+ -/-/-/-/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ -/+ +/+ +/+ +/+ -/+ IBM, 640 x 350 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 800 VESA, 1280 x 960 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1440 x 900 9 Specifications 81 9 Specifications Resolution Horizontal Frequency (kHz) 75. 000 65. 290 74. 556 88. 787 Vertical Frequency (Hz) 60. 000 59. 954 59. 885 59. 951 Pixel Clock (MHz) 162. 000 146. 250 193. 250 241. 500 Sync Polarity (H/V) +/+ -/+ -/+ +/- VESA, 1600 x 1200 VESA, 1680 x 1050 VESA, 1920 x 1200 VESA, 2560 x 1440(RB) Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. [. . . ]