User manual HASBRO MY FIRST BARREL OF MONKEYS

[. . . ] 3-14 INSTALLING THE SOFTWARE Natural Color . 4-3 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . 6-21 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) . [. . . ] If you press the [ DESCRIPTION ] button when there is no OSD, the input signal (Analog/DVI or Analog/ HDMI) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. This function is not available for products with an Analog interface only. Press [AUTO] button to adjust the screen settings automatically AUTO This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off · · The buttons on the right of the product are touch-type buttons. Touch the buttons lightly with your finger. Power LED This LED is turned on when the product works normally. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. Using the product 3-13 3-14 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Coarse COLOR Color Gamma SIZE & POSITION H-Position Reset SETUP&RESET PC/AV Mode Menu Transparency INFORMATION Monitor functions may vary according to models. V-Position Language Key Repeat Time Image Size Eco Saving Customized Key Menu H-Position Off Timer On/Off Auto Source Menu V-Position Off Timer Setting Display Time Contrast Fine Red Sub Menus Sharpness Response Time Green Bright HDMI Black Level Blue Color Tone Angle PICTURE Menu Controls the screen brightness. Brightness · · This menu is unavailable when < Description Bright> is set to <Dynamic Contrast> mode. This menu is unavailable when <Eco Saving> is set. Controls the contrast of the pictures displayed on the screen Contrast · · This menu is unavailable when < mode. Users can set suitable picture quality as needed. · · This menu is unavailable when < mode. This menu is unavailable when < Bright> is set to <Dynamic Contrast> or <Cinema> Color> is set. Removes vertical noise lines (line pattern) from the screen. Coarse The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu. This function is only available in Analog mode. Removes horizontal noise lines (line pattern) from the screen. Fine If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again. This function is only available in Analog mode. 3-14 Using the product Menu Description Accelerates the response time of the panel faster than the original response time so that moving pictures appear sharper and more natural. · · · <Normal> <Faster> <Fastest> · · · It is recommended setting the <Normal> or <Faster> when not viewing a movie. Monitor functions may vary according to models. User can choose the optimal mode from Normal / Faster / Fastest , according to the different input video signal. Response Time When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration (black level, lower-quality contrast, lighter color tone, etc. ) may occur depending on the connected external device. [. . . ] Use the software utility installed on your computer to set up this feature. STATE Power Indicator Power Consumption NORMAL OPERATION On 30 watts POWER SAVING MODE Blinking Typical 0. 3 watts POWER OFF Off Typical 0. 3 watts If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. More Information 6-16 6-17 Specifications MODEL NAME Size Panel Display area Pixel Pitch Synchronization Display Color Resolution Optimum resolution Maximum resolution Horizontal Vertical 24 inches (61 cm) 531. 36 mm (H) x 298. 89 mm (V) 0. 27675 mm (H) x 0. 27675 mm (V) 30 ~ 81 kHz 56 ~ 75 Hz 16. 7M 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz RGB Analog, HDMI Input Signal, Terminated 0. 7 Vp-p ± 5% separate H/V sync, Composite, SOG TTL level (V high 2. 0V, V low 0. 8V) Maximum Pixel Clock Power Supply 164MHz (Analog, HDMI) This product supports 100-240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable HDMI to DVI-D connector, Detachable 578. 6 x 359. 1 x 59. 2 mm (22. 8 x 14. 1 x 2. 3 inches) (Without Stand) Dimensions (WxHxD) / Weight 578. 6 x 433. 8 x 197. 0 mm (22. 8 x 17. 1 x 7. 8 inches) (With Stand) / 3. 6 kg (7. 9 lbs) Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity :10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing -1. 0°(±2. 0°) ~20. 0°(±2. 0°) S24B370H Signal Cable Environmental considerations Tilt Operating Storage Design and specifications are subject to change without prior notice. Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). [. . . ]