User manual HASBRO NERF SWITCHFIRE BLASTER

[. . . ] 18 3 Dear customer, Congratulations on your choice and thank you for purchasing one of our appliances. This practical, modern and functional appliance is manufactured using materials of the highest quality which are subject to strict quality control checks throughout the entire manufacturing process. The appliance is meticulously tested to ensure that it meets your demands and produces perfect cooking results. Do not remove the appliance from its protective packaging until it is installed in the unit. [. . . ] It is essential to ensure that all the burner parts and pan supports are correctly installed for the appliance to work correctly. Press the chosen burner control knob and turn it anticlockwise to the required setting. Use any type of lighter or flame (cigarette lighter, matches, etc. ) and bring it close to the burner. Switching on automatically If your hob can be switched on automatically (ignition sparkers): 1. Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. While the control knob is still pressed down, sparks are produced on all burners. The flame ignites (it is no longer necessary to press down the control knob). Turn the control knob to the required setting. If it does not come on, turn the control knob to the off setting and repeat the steps above. This time, press and hold the control knob for longer (up to 10 seconds). If after 15 seconds the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner on. 8 Safety system Depending on the model, your hob may have a safety system (thermocouple) that prevents the flow of gas if the burners accidentally switch off. Using these pans may cause some temporary deformation of the grease splash tray. This is normal and does not affect the operation of the appliance. Cast iron pan support (4/5 kW): code HEZ298107. Cast iron pan support (3. 3 kW): code HEZ298108. Enamelled iron pan support: code HEZ298110. Wok pan: code HEZ298103. Only for use on the auxiliary burner with pans which are no more than 12 cm in diameter. Enamelled iron pan support: Code HEZ298114. Simmer Plate This accessory has been designed to reduce the level of heat at the lowest power setting. Place the accessory directly on the pan support with the cones facing upwards, never directly over the burner. Code HEZ298105. 11 Simmer Cap This is a burner which is exclusively suited for cooking over a low heat. In order to use it, it is necessary to remove the auxiliary burner and replace it with the Simmer Cap burner. The manufacturer accepts no liability if these accessories are not used or are used incorrectly. Cooking recommendations Burner Double or triple flame burner Very high, high Medium Low Boiling, steaming, Reheating and keeping things hot: griddling, toasting, cooked and pre-cooked dishes. [. . . ] Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel. It is recommended that the cleaning product available from our Technical Assistance Service (code 464524) is used regularly. The stainless steel cleaner must not be used in the area around the controls. The (printed) symbols may be wiped off. 16 Faults Sometimes certain faults detected can be easily resolved. [. . . ]