User manual HASBRO PIRATES OF THE CARIBBEAN

[. . . ] Do not lift the appliance by protruding components (e. g. – In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. – If in doubt, have a technician connect the appliance. – Lay hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Removing the transport braces – Before using the appliance for the first time, make sure that you completely remove transport braces and keep them for subsequent transportation. [. . . ] Release the water pressure in the inlet hose Operating instructions; Maintenance - filter in water inlet. Drain residual water Operating instructions; Maintenance - drain pump. Disconnect the washing machine from the power supply. Dismantle the hoses. Washing machine Aligning the washing machine with a spirit level 1. Loosen the lock nut using a wrench, by turning it in a clockwise direction. 2. Change the height by turning the appliance feet. Caution: all four appliance feet must be firmly on the ground. Check the alignment of the washing machine with a spirit level and adjust if necessary. 2. Preparing and installing transport braces: 1. Remove the covers. Product number Please help us to avoid unnecessary call-outs by quoting the product and production numbers. This will also save you the associated additional costs. Aqua-Stop warranty only for appliances with Aqua-Stop 3. 7 Technical specifications Dimensions (width x depth x height) Weight Mains connection 60 x 59 x 84. 2 cm 69 - 83 kg depending on model Nominal voltage 220-240 V, 50 Hz Nominal current 10 A Nominal power 2000 - 2300 W 100 1000 kPa (1 10 bar) According to currently valid IEC 60 456 Read these instructions before switching on the washing machine. Also observe the separate Instruction manual. Keep all documents for use in the future or for the subsequent owner. Water pressure Manufacturer Operating instructions 5 Test programmes 6 7 Safety instructions – The washing machine is heavy - take care when lifting. – Caution: frozen hoses may rip/burst. Do not install the washing machine in areas exposed to frost or outdoors. – The washing machine could be damaged. Do not lift the appliance by protruding components (e. g. – In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. – If in doubt, have a technician connect the appliance. – Lay hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Mains cable Water outlet Water inlet Installation surface – The machine must be stable so that it does not move around. – The installation surface must be firm and level. [. . . ] Caution: the lock nuts on all four appliance feet must be screwed tightly against the housing. 2. Insert all 4 transportation protection devices and clamp the mains cable to the holders. Tighten the bolts. Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket. 0810 / 9000440474 The power supply and voltage indicated on the washing machine (rating plate) must be the same. [. . . ]