User manual HASBRO POKEMON BATTLING COIN GAME

[. . . ] The power cord should not –– touch hot parts, –– be pulled over sharp edges, –– be used as a carrying handle. Do not place the base or the kettle on or near hot surfaces such as a cooker or hob. 2011 15:25:14 6 en de You can turn off the kettle at any time by pressing the O ON/OFF switch 4 again. Warning: If you remove the kettle 1 from the base and replace it before the heating process is over, the kettle will not continue to heat the water. [. . . ] Warning: If you remove the kettle 1 from the base and replace it before the heating process is over, the kettle will not continue to heat the water. The selected settings will be lost (reset to factory setting). : Use the kettle only while the lid 2 is closed and the limescale filter 8 is in place. For physical reasons, the base 9 may collect some condensation water. This is normal; it does not mean that the kettle 1 leaks. When you set the temperature to 100°C, the kettle will turn off only after the water has reached the boiling point, i. It will bubble for a short period of time. After boiling, let the kettle cool down for 5 minutes before refilling it with water. Do not turn on the appliance if the kettle 1 is empty, otherwise the overheat control will engage and the appliance will switch itself off automatically. Before using for the first time ●● Remove any stickers or film. —● Clean the outside of the kettle 1 and base 9 with a damp cloth. Do not use strong or abrasive cleaning agents. —● Remove the limescale filter 8, soak it in a little vinegar, then rinse clean with clear water. —● Rinse the kettle 1 and the limescale filter 8 with clear water. Tip: Clean the stainless steel surface with a commercial stainless steel care product. Disposal Descaling Regular descaling –– makes your kettle last longer; –– ensures proper function; –– saves energy. Descale the kettle 1 with vinegar or a commercial descaling agent. —● Fill the kettle 1 with water up to the 1. Next, add a small amount of white vinegar and let it sit for several hours. You can also use a commercial descaling product and follow the manufacturer’s instructions. [. . . ] Next, add a small amount of white vinegar and let it sit for several hours. You can also use a commercial descaling product and follow the manufacturer’s instructions. —● Rinse the kettle 1 and the limescale filter 8 with clear water. Warning: Never use hard objects to remove limescale residue as this will damage the seal. [. . . ]