User manual HASBRO POKEMON S.S. ANNE GAME

[. . . ] If you pass the vacuum cleaner on to someone else, please also pass on this instruction manual. Replacement parts and special accessories A TURBO-UNIVERSAL® tool for upholstery BBZ42TB All-in-one brushing and vacuuming of upholstered furniture, mattresses, car seats, etc. Especially suitable for picking up pet hair. The brush roller is driven by the suction air flow through the vacuum cleaner. [. . . ] The manufacturer does not accept any responsibility for damage caused by worn floor tools. When your work is finished Figure 14 ● Switch off the appliance. *dependent on model 9 Figure 15 ● Unlock the telescopic tube by moving the sliding switch in the direction of the arrow and slide one tube into the other. Figure 16 To store the appliance, use the storage aid on the underside. A) Stand the appliance up by the handle. B)Slide the hook on the floor tool into the storage aid. Emptying the dust container Figure 17 In order to achieve good vacuuming results, the dust container should be emptied after every use or, at the latest, when dust or dirt has visibly collected on the fluff filter or when dust at one point in the container has reached the height of the marking. When emptying the dust container, always check how dirty the fluff filter is and, if necessary, clean it as detailed in the "Cleaning the fluff filter" instructions. Figure 26 Vacuum cleaner with “RotationClean” function Figure 21* The indicator lights up blue when the appliance is working at its optimum level. Once the indicator turns red and flashes, the plate filter must be cleaned. The appliance is automatically adjusted back to the lowest power setting. In this case, the appliance automatically adjusts to the lowest power setting and the indicator lights up red. — Switch the appliance off, empty the dust container and clean the fluff filter according to the instructions in "Cleaning the fluff filter". Figure 26 Figure 24* If required, you can also activate the cleaning procedure manually by pressing the "Clean" filter cleaning button when the appliance is switched on. If suction power is reducing, you can also clean the filter even if the indicator has not lit up. We recommend that you clean the plate filter each time before emptying the dust container. Caution any resistance when closing the lid, If you notice check that the filter is complete and that the filter and dust container are correctly seated. Filter care Cleaning the plate filter Your appliance is equipped with a "Sensor Control" Function. This function constantly monitors whether your vacuum cleaner is reaching its optimum power level. The indicator light lets you know when you need to clean the plate filter, so that the vacuum cleaner can reach its optimum power level once more. 10 *dependent on model Figure 25 If the plate filter is particularly dirty, the dirt can also be washed off. A)Turn the bottom part of the filter unit anticlockwise as far as it will go. [. . . ] — For simple cleaning without water, simply tap the filter around the edge of the cap. — For more thorough cleaning, rinse the filter from the outside with water, and allow it to dry completely before using it in the vacuum cleaner again. Cleaning the fluff filter The fluff filter should be cleaned at regular intervals in order to ensure optimum operation of the vacuum cleaner. Figure 26 ● Open the appliance lid and remove the dust container from the appliance. [. . . ]