User manual HASBRO PUNCH LINE

[. . . ] € The contents being edited can be printed out or saved. important Information •  This software has been shipped after strict quality control and product inspection. If, however, you find any failure or malfunction, contact your product dealer. €  Please understand that HASBRO CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is recognized under law. [. . . ] (7) (4) (5) : Add a new sheet to the right of the selected sheet. : Copy the selected sheet and insert it on the right of the selected sheet. : Move the selected sheet one to the left. : Move the selected sheet one to the right. The drawn shape will be determined as an object 1 second* after you lift the touch pen from the board. If you start drawing another object within 1 second* after you lift the touch pen from the board, the drawn shapes will be determined to be a single object even though they are separate. (Page 20) Less than 1 second After 1 second “Pen 1” to “Pen 3” buttons. Both shapes are determined as a single object. TIPS • You can switch through “Pen 1” to “Pen 3” and “Eraser” by repeatedly pressing Function Button 2 of the touch pen. To change functions using Function Button 2, select the touch panel driver “Properties”, and set “Function Button 2” to “Pen Software Link” on the “OPERATION SETTING” tab. • For details about objects , refer to page 12. N Changing the eraser size The size of the eraser can be changed by selecting it from the palette for the “Eraser” button. To display the palette, touch the “Eraser” button again while it is in the selected state. TIPS • The method of closing the palette can be changed. (Page 20) E 11 Editing an object The drawn lines and the images pasted on the board are handled in the software as an “object”. N Selecting an object You need to select an object before editing it. Select point When you select an object and then touch , the expansion menu appears to allow you the following edit operations: • Cut • Copy • Paste • Delete • Rotate • Order • Cancel selection • Group • Ungroup • Property Touch an object.  Touch an area where something is drawn. You cannot select an object by touching the area where nothing is drawn. Selected object The area of the object is indicated with a dotted line, and symbols called select points appear on the vertices and sides of the area. By specifying an area by dragging, you can select several objects inside the area. (Objects which are not entirely included in the area are not selected. [. . . ] E 21 Installing/Uninstalling the Software The operations in this section require administrator privilege. 0 or later must be installed on the computer on which the Pen Software will be used. Insert the supplied CD-ROM into the CD-ROM drive of the computer. For the remainder of the procedure, follow the instructions shown on the screen. [. . . ]