User manual HASBRO PUT MR FREEZE ON ICE CARD GAME

[. . . ] € The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician. 5 [ENGLISH] ENGLISH Preparing the Remote Control Unit and the Touch Pen. [. . . ] If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye. 2 Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 0.  severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. e 2 SAFETY PRECAUTIONS (Continued) 2 D 1.  o not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns. eNGLISH WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: PC/AV DVI-D output terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal, PC D-SUB input terminal, PC RGB input terminals, and RS-232C input/output terminals. If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. -  o not damage the power cord nor place heavy objects on D it, stretch it or over bend it. Damage to the cord may result in fire or electric shock. -  o not use the power cord with a power tap. d Adding an extension cord may lead to fire as a result of overheating. -  o not remove or insert the power plug with wet hands. d Doing so could result in electric shock. - Unplug the power cord if it is not used for a long time. -  o not attempt to repair the power cord if it is broken D or malfunctioning. Refer the servicing to the service representative. € Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. € Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized HASBRO dealer. [. . . ] Press , , or to select the date and or to change the numerical time, and press values. Press Turning power on/off Press the POWER button to turn the power ON/OFF. The clock is maintained by the internal battery. If you already set the time but the date/time setting screen appears when the power is turned on, the internal battery may be exhausted. [. . . ]