User manual HASBRO PUZZ 3D BAVARIAN MANSION

[. . . ] €¢ The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] -  emember that children can become excited while watching a program, especially on a “larger than life” monitor. Care R should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down. -  are should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by C curious children. E 4 TIPS AND SAFETY INSTRUCTIONS -  he TFT color LCD panel used in this monitor is made with T the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor. -  o not display a still picture for a long period, as this could D cause a residual image. - Never rub or tap the monitor with hard objects. -  his product comes with RICOH Bitmap Fonts produced and T sold by RICOH COMPANY, LTD. -  ll other brand and product names are trademarks or A registered trademarks of their respective holders. For the monitor in horizontal orientation Unit: inch [cm] 7-7/8 [20] * • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range. €¢ Adhere to the following when installing the monitor in its vertical orientation. Failing to adhere to the following may cause malfunctions. - nstall the monitor such that the power LED is located on I the downside. - Set the MONITOR on the SETUP menu to PORTRAIT. ) • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. €¢ After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. €¢ Do not place the monitor on a device which generates heat. €¢ Use the supplied vertical sticker when you install the monitor in vertical orientation. 2 [5] 2 [5] 2 [5] For the monitor in vertical orientation Unit: inch [cm] * 7-7/8 [20] Operation panel Logo 2 [5] 2 [5] 2 [5] * This monitor can be installed close to a wall. [. . . ] €¢ Do not expose the remote control unit to liquids, and do not place it in an area with high humidity. €¢ The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting. €¢ Objects between the remote control unit and the remote control sensor may prevent proper operation. €¢ Replace the batteries when they run low as this may shorten the remote control’s operation range. [. . . ]