User manual HASBRO PUZZ 3D MINIATURES TEE PEE

[. . . ] Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] ž For operating the menu screen using the GyroRemote see pages 54 and 55. Note • Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see. ) • When a DVD player or Digital Video is connected, select 480P as the input signal. € See “Checking the Input Signal” below for information on the currently selected input signal. 29, 3:16 PM Checking the Input Signal This function allows you to check the current input signal information. Select “Signal Info” in the “Fine Sync” menu on the menu screen. ž For operating the menu screen, see pages 50 and 52. ž For operating the menu screen using the GyroRemote see pages 54 and 55. Note • The projector will display the number of scanned lines available input from audiovisual equipment such as a DVD player or Digital Video. auto Sync Adjustment Used to automatically adjust a computer image. Therefore, if the projector (and computer) is not assigned an IP address, they cannot be identified and thus a wireless connection cannot be possible. 154 ■ Assigning IP addresses When creating a local network where the projector and a computer are connected in a wireless environment, 192. 254 can be assigned as the IP addresses for the devices connected to that network. 1 and as long as there are no conflicts, the default settings do not have to be changed. This projector comes with a DHCP server function that automatically assigns IP addresses to devices connected to the network. A wireless channel is a frequency used by wireless LAN cards when communicating. If other wireless LAN networks are being used near the location where the projector is, make sure that different channels have been set to avoid interference. 11ch 6 ch 1ch ■ Assigned wireless channels If there are no other networks that can cause interference nearby, set either 1, 6, 13, or 14. The wireless channel set in the projector is 192. 1 and as long as there are no conflicts, the default settings do not have to be changed. dHCP server function ■ What is a DHCP function? [. . . ] Keystone correction Function to digitally correct a distorted image when the projector is set up at an angle, smoothens out jaggies on keystone images and compresses the image not only horizontally but vertically keeping the 4:3 aspect ratio. Clock Clock adjustment is used to adjust vertical noise when clock level is incorrect. Password A password is set so that changes cannot be made in the settings of the “Options (2)” menu. CLR Temp (Color temperature) Function that can be used to adjust the color temperature to suit the type of image input to the projector. [. . . ]