User manual HASBRO PUZZ 3D MINIATURES WINDMILL

[. . . ] The energy efficiency of this ENERGY STAR qualified model is measured based on a ratio between the model’ s CADR for Dust and the electrical energy it consumes, or CADR/Watt. Indd 1 2009/12/28 14:07:10 ESPAÑOL PURIFICADOR DE AIRE FRANÇAIS ENGLISH Please read before operating your new Air Purifier The air purifier draws in room air from the air intake, passes the air through a PreFilter, a Washable Deodorizing filter and a True HEPA filter inside of the unit, then discharges the air through the air outlet. 3 microns that pass through the filter and also helps absorb odors. The Washable Deodorizing filter gradually absorbs odors as they pass through the filter. [. . . ] By continuously discharging strong airflow cycles, the unit effectively removes airborne dust, pollen, mold and allergens from the air as they are drawn through the filter system. Water must be in the Water Tank when this mode is selected. The unit humidifies when there’s water in the Water Tank, and it operates without humidifying when there is no water in it. ENGLISH 2009/12/28 14:07:17 Press the MODE 1 the displayQUICK CLEANmode. Button on to select this When the operation finishes, the unit will return to the prior operation. FAN SPEED Button Press the FAN SPEED Button to select the preferred fan settings. Indicator lights will show the speed currently selected. Please note the fan speed cannot be adjusted during the QUICK CLEAN Mode. AUTO operation The fan speed is automatically switched (HIGH*, MEDIUM, LOW) depending on the amount of impurities in the air. The sensors detect the impurities for efficient air purification. POLLEN mode operation MAX operation MEDIUM operation LOW operation The unit will operate at High level for 10 minutes, then will alternated between MED and HIGH every 20 minutes. The Fan Speed Indicator Lights will display the currently set sensor sensitivity level. The factory setting is Standard, indicated by the MED light. 2 Press the Fan Speed Button to set the desired sensor sensitivity. Refer to the diagram on the right to select the desired sensor sensitivity level. Fan Speed Indicator Light Sensor Detection sensitivity 3 Note that if the Power OFF Button is not pushed Press the Power OFF Button. Within 8 seconds of adjusting sensor sensitivity, the setting will be saved automatically. The sensor sensitivity setting will be saved even if the unit is unplugged. high Standard Low E-14 PUZZ 3D MINIATURES WINDMILL_Eng. Indd 14 2009/12/28 14:07:17 CARE AND MAINTENANCE To maintain optimum performance of this air purifier, please clean the unit including the sensor opening and filters periodically. When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. electrical shock and/or bodily injury may occur as a result. [. . . ] • Are the dust sensor openings blocked or clogged?) (See E-15) • After cleaning or replacing filters, connect the power cord to an outlet and press the Filter Reset Button. (See E-15) • Check to see if the Lights OFF Mode selected. If so, then press the Lights Control Button to activate the indicator lights. [. . . ]