User manual HASBRO PUZZ 3D VICTORIAN HOUSE CATHERINE

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. [. . . ] To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. 3 When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button. 4 * The above screen appears when using the "Disc 1" CD-ROM. When the port selection window appears, select the port that the PCL6 printer driver is using (USB001, etc. Book 21 ページ ２００９年７月７日　火曜日　午後２時８分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER ENGLISH 5 When the printer driver selection window appears, remove the [PCL6] checkmark and select the printer driver to be installed, and then click the [Next] button. Click the checkbox of the printer driver to be installed so that a checkmark ( ) appears. 9 Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Note • If you are using Windows Vista/Server 2008 If a security warning window appears, be sure to click [Install this driver software anyway]. € If you are using Windows 2000/XP/Server 2003 If a warning message regarding the Windows logo test or digital signature appears, be sure to click the [Continue Anyway] or [Yes] button. 10 Note • When the PC-Fax driver is being installed, this screen does not appear. 1 Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. 4 Select the printer name (configured as a shared printer). (1) *The above screen appears when using the "Disc 1" CD-ROM. (2) 2 3 (1) Select the printer name (configured as a shared printer on a print server) from the list. If you are using Windows 2000/XP/Server 2003, you can also click the [Add Network Port] button displayed below the list and select the printer to be shared by browsing the network in the window that appears. Note If the shared printer does not appear in the list, check the settings on the print server. Book 23 ページ ２００９年７月７日　火曜日　午後２時８分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER ENGLISH 5 Perform steps 5 through 12 on page 14 to continue the installation. In the printer driver selection screen, be sure to select the same type of printer driver as the printer driver installed on the print server. If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. Book 24 ページ ２００９年７月７日　火曜日　午後２時８分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. [. . . ] Solution If the machine was connected to your computer with a USB cable before the printer driver was installed from the installer, check if information on the unsuccessful installation remains in "Device Manager". (For information on "Device Manager" , see Help in Windows. ) If the model name of the machine appears in "Other devices" in "Device Manager", delete it, restart your computer, and install the printer driver again. ENGLISH The printer driver cannot be installed (Windows 2000/XP/Server 2003) If the printer driver cannot be installed on Windows 2000/XP/Server 2003, follow the steps below to check your computer settings. [. . . ]