User manual HASBRO QUEASY BAKE-MIXERATOR

[. . . ] Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ] * Up to 1, 000 original sheets can be stored in each location. Total Document Storage capacity is determined by the size of the documents. Storing Documents in the MEMORIZE Mode 1 2 Place the original(s). Page 2-9 Press the EDIT key to enter the edit menu, and press the DOCUMENT STORAGE key. - If the desired function keys are not displayed, press the Next key to change the menu screen. 3 Press the MEMORIZE key. 4 Press the file name column of the location number (ID) where you want your document stored, key in the file name and press the SET key. - Select any ID where no data has been stored. - Entering letters Page 5-28 4-28 USING THE EDITING FUNCTIONS 5 Press the START key. - The memorization process starts automatically. 1 2 3 4 5 6 - To change the file name, select the ID you want to change in the list on the display, press the file name column, delete the file name already entered with the B Space key in the letter entry screen, then enter a new file name, and press the SET key. Page 5-28 - Entering letters - To confirm a memorized job, select the ID from the list on the display and press TEST PRINT . - To delete a memorized job, select the ID from the list on the display and press the DELETE key. Then, press the Delete key on the next screen. Making Copies in the PRINT Mode 1 2 3 Place paper in the drawer(s). Page 2-4 Press the EDIT key to enter the edit menu, and press the DOCUMENT STORAGE key. - If the desired function keys are not displayed, press the Next key to change the menu screen. 7 8 Press the PRINT key. 9 10 4 5 Select the ID of the job you want to print out, and press the SET key. - The memorized functions are recalled. Select other copy modes as required. 11 12 Press the START key. 4-29 14. OVERLAY This function stores the images that you frequently use and makes copies by overlaying onto the copied originals. * The original can be overlaid with the stored image of the same size and in the same orientation. (It cannot be adjusted with reduction and enlargement. ) Storing image 1 2 3 Overlay 4 Storing Image 5 6 7 8 9 10 11 12 1 2 Place the original you want to have memorzied. Page 2-9 Press the EDIT key to enter the edit menu, and press the OVERLAY key. - If the desired function keys are not displayed, press the Next key to change the menu screen. 3 Press the MEMORIZE key. 4 Press the row of the file name list you desire, then press the FILE NAME key. 4-30 USING THE EDITING FUNCTIONS 5 6 7 Input the file name with the screen for entering letters and press the SET key. - Entering letters. Page 5-28 1 2 3 Press the START key. -The original starts scanning to memorize the image. The form will be stored as shown on the right. 4 5 Confirming Stored Image (Test Print) 6 7 8 1 2 1 2 3 Perform steps 2 and 3. Page 4-29 Press the file name you desire (the selected file name will be shaded), then press the TEST PRINT key. - The stored image starts printing out. Deleting Image Perform steps 2 to 3. Page 4-29 9 10 11 12 Press the file name you desire ( the selected file name will be shaded), then press the DELETE key. Press the Delete key. 4-31 14. OVERLAY (Cont. ) 1 2 3 4 5 6 7 8 9 10 11 12 Overlaying Originals with Stored Image 1 2 3 4 Place paper in the drawer(s). Page 2-11 - Originals can be set maximum 100 sheets at a time. Press the PROGRAM key to enter the program menu, and press the ADF key. 4 Press the ADF key. Select other copy modes as required. 10 11 12 5 Press the START key. When the number of originals is too large to be set at one time, you can divide the originals into two to ten sets and set them one after another. To do so, place the first set of originals first, and press the CONTINUE key while the scanning is in progress. After they have been scanned, place the previous set of originals. 5-2 USING THE SPECIAL FUNCTIONS Single-feed Mode 1 Page 2-4 1 2 Place paper in the drawer(s). Press the PROGRAM key to enter the program menu, and press the ADF key. 2 3 4 3 Press the SADF key. 5 Select other copy modes as required. 6 4 5 Place an original. Page 2-9 7 8 9 10 11 12 - The original is automatically pulled in and the screen changes as shown on the right. - If there are more originals, set them in the same way. (The same operation is carried out whether or not you press the YES key. ) After all originals have been fed through the reversing automatic document feeder, press the FINISHED key. - Copying begins. 5-3 2. MIXED-SIZED ORIGINALS When placing the different-sized originals in the reversing automatic document feeder, you can make copies by setting MIXED-SIZED ORIGINALS. The available combination of mixed-sized originals are as follows: - LD, LG, LT, LT-R - A3, A4, A4-R, B4, B5 * The image may be copied out of position depending on the combination. 1 2 3 4 5 6 7 8 9 10 11 12 1 2 Place paper in the drawer(s). - Bypass copying is not possible. Page 2-4 Adjust the slide to the widest paper size, and align the originals against the left front side. - Place the originals face up. 3 Press the PROGRAM key to enter the program menu, and press the MIXED ORIGINAL SIZES key. 4 5 Press the SET key. Select either the Automatic Paper Selection ( Page 3-2) or Automatic Magnification Selection mode ( Page 3-4). - To make duplexed copies, select the automatic magnification mode. Select other copy modes as required. 6 Press the START key. 5-4 USING THE SPECIAL FUNCTIONS 3. JOB MEMORY You can store and recall a combination of frequently used copy jobs at anytime. Up to four such combinations of jobs can be stored. * You cannot delete the copy modes that have already been stored in the memory, but you can rewrite new jobs on the memory key in which some copy modes have already been stored. 1 2 Storing a Combination of Copy Job Settings 1 2 Select the desired copy modes. Example : Reproduction ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1-7 Setting Copy Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Setting Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Setting Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 Setting Tab Paper in the Bypass Guide . . . . . . . . . [. . . ]