User manual HASBRO REAL POWER TOOL SHOP INSTRUCTIONS AND PROJECT PLANS

[. . . ] There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. Warning: Stop the car before operating the unit. [. . . ] Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound may be interrupted or unclear while listening to an external component. Bluetoothா For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. ( Installation/Connection Manual) KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit. Operations may be different depending on the connected Bluetooth device. For details, refer also to the instructions supplied with the device. KS-BTA100 Preparation For details on registering and using the Bluetooth device, refer to the instructions manual supplied with KS-BTA100. 1 Register (pair) a Bluetooth device with KS-BTA100. 2 Change the <SRC SELECT> settings of this unit. All zone Selecting the preset color You can select a preset color for <BUTTON ZONE>, <DISP ZONE>, and <ALL ZONE> separately. CLOCK [AUTO]: The built-in clock is synchronized with the clock data received from the FM Radio Data System station. Selects the display and button illumination adjusted in the <BRIGHTNESS>/ <COLOR SETUP> setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. DAY [31]/NIGHT [11]: Brightness settings for the display and button illumination for day and night. Displayed only when the source is “FM”. This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>. The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set to higher than “VOLUME 30”. *10 Only for FM Radio Data System stations. TUNER AUDIO ENGLISH | 15 REAL POWER TOOL SHOP INSTRUCTIONS AND PROJECT PLANS_E_EN 2011/12/7 1:56:19 Menu operations Menu item TUNER IF BAND (Intermediate frequency band) Selectable setting (Initial: [XX]) [AUTO]: Increases the tuner selectivity to reduce interference noises between adjacent stations. ) WIDE: Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. (Displayed only when the source is “USB-IPOD”. [. . . ] The unit cannot detect the connected device. remedy/Cause Troubleshooting Check the cords , aerial and cable connections. Check the condition of the disc, connected device and recorded tracks. Ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. [. . . ]