User manual HASBRO RISK 1975

[. . . ] Do not view directly with optical instruments. Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. [. . . ] Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Programme Search Usually when you select a preset number, the station preset in that number is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting. TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. All tracks will be played repeatedly until you change the source or eject the disc. If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot. If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100) through the disc by turning the control dial quickly. You can use only one of the following playback modes at a time. Pressing number button 1 (RPT) or 2 (RND) can enter REPEAT/RANDOM setting directly. Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning) * "NO NAME" appears for conventional CDs or if not recorded. In this case, change the setting to any other than <DIMMER AUTO>. *3 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *4 If you are using a two-speaker system, set the fader level to "00. Selectable setting, [Initial: Underlined] LOW POWER : VOLUME 00 ­ VOLUME 30 (Selects if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. ) / HIGH POWER : VOLUME 00 ­ VOLUME 50 See page 6. AF ON : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). ) / AF-REG ON : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. ) / WIDE : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. *8 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. *11 Displayed only when any source other than "AM/ F-AUX/ R-AUX/ BT AUDIO" is selected separately. *12 When <BT ADAPTER> is selected, source name is changed to "BT AUDIO" from "R-AUX. [. . . ] (page 12) Check to be sure the recommended stereo mini plug is used for connection. Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording). Stop playback while driving on rough roads. Make sure nothing is blocking the loading slot. [. . . ]