User manual HASBRO ROYAL NABOO TRANSPORT TELEPHONE ANSWERING MACHINE

[. . . ] AGES 7 & UP MODEL 88-306 883060001IWTI-03 BATTERY SAFETY: To reduce the risk of fire or personal injury, read and follow these instructions. Use only the following type and size of battery: 5 x 1. 5V, LR44 Button Cell. Do not dispose of the battery in a fire. Check with local codes for possible special disposal instruction. [. . . ] A beep will be heard and the display will read "0" and "CL" alternatively. Lift the handset of your telephone and confirm that you have a dial tone. Press the FORWARD button or the REPEAT button until the display shows "30". A voice prompt "THIRTY" will be heard. Press the CLOCK button once to enter the minute "30", you will hear a voice prompt "WEDNESDAY, TEN THIRTY AM". Please note that the clock will start functioning once the system is powered up. As long as the system is powered up with battery or AC power, the clock will function. - To record outgoing message, press * 1. If you press "0", message play menu will be announced. Note: this remote comment will not be announced - To record OGM, press * 1. - To change security code, press * 6 - To erase all messages, press * 7 - To end of remote operation, press #. Note: If you press the Touch Tone button by mistake during remote operation, press "8" to erase the pervious comment. ANSWERING SYSTEM OPERATION Prepare for use It is important that you record the OGM before operating the Answering System. Otherwise, the default OGM will be announced "PLEASE LEAVE YOUR MESSAGE AFTER THE TONE". Turning the Answering System On and Off When the Answering System is On, the display will show the "0" and the LED is on. To Turn Off the Answering System Press the "On/Off" button, the LED will be turned off and a beep tone will be heard. The display should read "OFF" and then "0". To Turn On the Answering System Press the "On/Off" button, the LED will be turned on and a beep tone will be heard. The display should read "On" and then "0". Record Your Outgoing Message (OGM) Your Answering System has the capability to hold one 60 second OGM. Press and hold the RECORD button for 2 seconds until a beep tone is heard and the display reads A1. Speak clearly into the microphone from 6 to 8 inches away and the display will count up. Press STOP when you have finished your message. The Answering System will play back your OGM and then the display should read A1. [. . . ] If there is no cell installed or the cells were dead, once AC power resumes, all memory will be erased. You have to re-program all settings like Date/Time, OGM, PIN Security and CBT codes. 90-DAY LIMITED WARRANTY Tiger Electronics, Inc. (Tiger), warrants to the original consumer purchaser of this product that the product will be free of defects in material or workmanship for 90 days from the date for original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship. [. . . ]