User manual HASBRO RUBIKS ECLIPSE

[. . . ] 3 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Parts Name and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Terminal Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not use the product under the following circumstances, which may cause fire or electric shock. · · · · · · in a dusty or humid place near a heater in a oily, smoky or damp place in direct sunlight with high temperature, such as the closed car where the temperature is lower than 5°C (41°F) or higher than 35°C (95°F) Recommended Use · · · For optimum performance, allow 30 minutes for warm-up. Rest your eyes periodically by focusing on an object at least 5 feet away. Clean the monitor surface with a lint-free, nonabrasive cloth. Avoid using any cleaning solution or glass cleaner! NOTE: This product contains a Lithium Battery which contains Perchlorate Material - special handling may apply, See www. dtsc. ca. gov/HazardousWaste/perchlorate/ This symbol mark is for EU countries only. This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV. Your HASBRO ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in! Image persistence · Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. Ensure that the temperature near the air inlet is 33°C or lower. · EN-8 Connections Before making connections: · · First turn off the power of all the attached equipment and make connections. Refer to the user manual included with each separate piece of equipment. DVI-D cable DVI-D Computer 56P-QF60LCU (Rear panel) DVI-D INPUT1 INPUT2 INPUT3 INPUT4 Recommended video signal timing for this product is as follows. Resolution 1920×1080 · · · · Frequency Horizontal 67. 5 kHz Notes Vertical 60 Hz Each of INPUT 1 to 4 connectors To display images at a resolution of 3840x2160, input 1920x1080 signal to each of INPUT 1 to 4 connectors. The image of 2544x1080 signal can not display correctly. Images may not be displayed correctly depending on the type of video card or driver. Signals input to INPUT 1 to 4 connectors are laid out on the screen as follows. INPUT 1 INPUT 2 INPUT 3 INPUT 4 Connect the power cord 1. Insert one end of the power cord into the power input connector of this product. Plug the power cord in a wall outlet. POWER Clamper · · The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. Fully insert the prongs into the power outlet socket. Loose connection may cause noise. EN-9 Basic operation Power ON procedures 1. Turn the Main Power Switch on the rear of the product to ON to turn on the main power. [. . . ] Flickers and moire patterns appear when a fine pattern is This symptom may occur when a fine pattern is disdisplayed. This is not a failure, but due to the characteristics of the LCD panel. Lines aren't displayed in correct width. This symptom may occur when an image of other than 3840x2160 resolution is displayed. [. . . ]