User manual HASBRO SAND WORKS 1047

[. . . ] Pass them on to any new owners of the appliance. Ventilation To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). Keep all packaging material out of reach of children. [. . . ] Once the pre-heating stage is completed, the stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven. During cooking it is always possible to: - Change the cooking function by turning the SMALL SPACE FUNCTION knob. - Change the temperature by turning the TEMPERATURE knob. - Set the cooking duration in addition to the cooking end time. - Stop cooking by turning the SMALL SPACE FUNCTION knob to the “0” position. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed. cooking functions GRILL function The top heating element is activated. By turning the TEMPERATURE knob, the different power levels which may be set will appear on the display; these range between 5% and 100%. The high and direct temperature 8 of the grill is recommended for food which requires a high surface temperature. The Small Space has been selected and that it is therefore possible to adjust the Small Space settings; the icon lit up on the display indicates that the Main Space has been selected and that it is therefore possible to adjust the Main Space settings. Both ovens will begin the preheating stage. The temperature may be changed by turning the TEMPERATURE knob. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven. During cooking it is always possible to: - Change the temperature by turning the TEMPERATURE knob. - Set the cooking duration in addition to the cooking end time. - Stop cooking by turning the MAIN SPACE FUNCTION knob to the “0” position. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. [. . . ] € All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and are even dishwasher safe. Never use steam cleaners or pressure cleaners on the appliance. Replacing the light bulb To replace the oven light bulb: 1. Remove the glass cover of the lamp-holder. [. . . ]