User manual HASBRO SCRABBLE JR

[. . . ] Pass them on to possible new owners of the appliance. Electrical connections After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e. [. . . ] When the ICE PARTY function has finished, press the ICE PARTY button to stop the corresponding LED from flashing and to silence the sound alert. The flashing and sound alerts indicate that the function is complete and that the bottle should be removed from the freezer compartment. The temperature inside this compartment may be set using the COOL CARE ZONE button. The temperature values that may be selected are -8°C, -12°C, -18°C; these values are indicated by the icons on the display. If the COOL CARE ZONE operating mode has not been activated, the compartment operates as a normal freezer compartment. GB Navigating the display Setting the temperatures: If the product is switched on, the refrigerator and freezer compartment displays will indicate the temperature values set at that moment. To change them, simply press the - and + buttons corresponding to the compartment for which you wish to change the set temperature. More specifically, each time the buttons are pressed, the temperature increases or decreases and the level of cold generated inside the compartment is adjusted accordingly. The temperature values that may be selected for the refrigerator compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are -18°C, 19°C, -20°C, -21°C, -22°C, -24°C and -26°C. When the “ECO” function is active, the appliance automatically adjusts the temperatures according to the conditions inside and outside the refrigerator, in order to minimise the amount of energy consumed; the activation of this function is signalled by the ECO LED on the keypad lighting up. 15 GB No Frost The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. 1 2 16 Maintenance Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: 1. Press and hold the ON/OFF button for approximately two seconds, until everything on the display switches off apart from the red LED corresponding to the ON/ OFF button. If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation, it is sufficient to hold the ON/OFF button down for more than two seconds. To disconnect the appliance, follow points 1 and 2. Replacing the light bulb To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W). [. . . ] To silence the buzzer, press the ALARM RESET button or one of the freezer temperature adjustment buttons, or open and close the refrigerator door. To remove the “A1” message from the display and restore normal freezer operation, press one of the freezer temperature adjustment buttons twice or switch the product off and on again. • The temperature of the freezer is dangerously high: the food inside must not be eaten. To silence the buzzer, press the ALARM RESET button or one of the freezer temperature adjustment buttons, or open and close the refrigerator door. [. . . ]