User manual HASBRO SIMON

[. . . ] WARNING: The document camera and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. WARNING: Never attempt to replace the lamps. Refer all lamp servicing to qualified service personnel. Copyright Notice All rights reserved. [. . . ] You can also recall up to eight individual images captured by the document camera. Saving and Recalling Camera Settings To save your settings, press the PRESET SET button on the remote control, then press one of the numbered buttons between 1 and 8. The message PRESET x WRITE appears on the screen (where x is the number assigned to the group). To recall a group of saved settings, press the PRESET CALL button on the remote control, then press the number of the group you want to use. The message MOVE x appears (where x is the number of the group) and the appearance of the screen changes to show your settings. SET Assign a number to saved settings and images PAUSE 2x PRESETCALL IMAGE CALL LAMP BASE RGB2 SET POSI/NEGA COLOR/B&W INPUT ZOOM WIDE UPPER MAIN RGB1 Saving and Recalling Images To save a copy of the projected image, press IMAGE SET on the remote control, then press one of the numbered buttons between 1 and 8. The message MEMORY STATUS appears, followed by IMAGE x WRITE, where x is the number assigned to the image. To recall a saved image, press IMAGE CALL on the remote control, then the number of the image you want to display. The saved image appears on the screen. TELE NEAR FOCUS FAR NORMAL OPEN CLOSE AF IRIS Press to save and recall settings Press to save and recall images 34 Using the Document Camera Using the Camera Head as a Conventional Video Camera By rotating the camera head to a horizontal position, you can use the document camera as a conventional video camera. To view walls or distant objects, flip down the close-up lens. The document camera can resolve images from 1. 6 feet (0. 5 m) to infinity. Camera head in horizontal position note The camera's shutter operates at 20 frames per second. Close-up lens Using the Image Mate Software The Image Mate® software allows you to transfer images from the document camera to a computer running Windows. ® You can also use the virtual remote control feature to control the document camera and change its settings. note To use the Image Mate software, connect the document camera to your Windows computer with the USB cable that came with the camera. Installing the Software Follow these steps to install the Image Mate software: 1. Insert the Epson Utility Software CD-ROM in your drive. Open the CD-ROM window. For Windows XP, click Start > All Programs > My Computer, then double-click the CD-ROM icon. All you need to do on a regular basis is keep the lenses and stage clean. Any dirt or smears on the lenses or stage may show up on your displayed image. You should not replace the lamps or any other parts. If any part needs replacing, contact your dealer or a qualified servicer. This chapter covers the following: Your Cleaning the lenses Cleaning the document camera case Transporting the document camera 39 Cleaning the Lenses Clean the lenses whenever you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smears on the lenses, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. Clean both sides of the close-up lens. Main lens Close-up lens 40 Maintaining and Transporting the Document Camera Cleaning the Document Camera Case Before you clean the case, first turn off the document camera and unplug the power cord. To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Do not use wax, alcohol, benzene, thinner, or other chemical detergents. Take special care when cleaning the stage, or you may scratch it. [. . . ] ("Epson") warrants to the first end user customer of the Epson product enclosed with this limited warranty statement that the product, if purchased and used in the United States or Canada, conforms to the manufacturer's specifications and will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase (except that the warranty period is 90 days for lamps). For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: Should your Epson product prove defective during the warranty period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your Epson Dealer or Epson Customer Care Center. Epson will, at its option, repair or replace on an exchange basis the defective unit, without charge for parts or labor. [. . . ]