User manual HASBRO SLEEP OVER CLUB SCARED TO DEATH NIGHT

[. . . ] Ventilation To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). GB Positioning  Keep all packaging material out of reach of children. it may present a choking or suffocation hazard (see Precautions and tips). [. . . ] • Place the dripping pan on shelf level 7 and pour in 150 g cold water. • Place the food inside the oven while it is still cold. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven. During cooking it is always possible to: - Change the cooking function by turning the SMALL SPACE FUNCTION knob. - Change the temperature by turning the TEMPERATURE knob. - Set the cooking duration in addition to the cooking end time. - Stop cooking by turning the SMALL SPACE FUNCTION knob to the “0” position. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed. cooking functions GRILL function The top heating element is activated.  In order to improve the oven’s energy efficiency, the preheating time of the SMALL SPACE cavity lasts about 15 minutes.  If the MAIN SPACE is set at a temperature below 150°C, in order to safeguard the cooking results, the grill function will not start: the display will visualise “OFF. Select the desired cooking function for each recess by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knobs. The icon indicates that the Small Space has been selected and that it is therefore possible to adjust the Small Space settings; the icon lit up on the display indicates that the Main Space has been selected and that it is therefore possible to adjust the Main Space settings. Both ovens will begin the preheating stage. The temperature may be changed by turning the TEMPERATURE knob. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven. During cooking it is always possible to: - Change the temperature by turning the TEMPERATURE knob. - Set the cooking duration in addition to the cooking end time. - Stop cooking by turning the MAIN SPACE FUNCTION knob to the “0” position. [. . . ] Replacing the light bulb To replace the oven light bulb: Oven compartment 1. Remove the glass cover of the lamp-holder. Remove the light bulb and Lamp replace it with a similar one: halogen lamp Glass door voltage 230 V, wattage 25 W, cap G 9. Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. [. . . ]