User manual HASBRO STAR WARS EPISODE I DESTROYER DROID ROOM ALARM

[. . . ] When an intruder is detected, the destroyer droids spring open to the "attack" position and the alarm is sounded! "CLOSED" The Room Alarm must be manually reset in the "closed" position (see diagrams above) each time the alarm is activated. If the Room Alarm is in the "attack" position and an intruder is detected, it will sound the alarm but it will not move. Resetting the Room Alarm into the "closed" position before an intruder is detected will allow the Room Alarm to sound the alarm and open to the "attack" position when an intruder is detected. 1. [. . . ] An intruder entering the Intruder Detection Area will trip the alarm. The selected alarm sound will be heard and the Room Alarm will open to the "attack" position, if the Room Alarm was reset to the "closed" position before an intruder was detected. After the alarm sound stops, reset the Room Alarm to the "closed" position and the alarm sound will reset itself, waiting for the next intruder. 4. DEFECT OR DAMAGE 4. GENTLY fold the guns upward toward the head. If a part of your ANIMATED DESTROYER DROID ROOM ALARM is damaged or something has been left out, DO NOT RETURN THE GAME TO THE STORE. The store doesn't have replacement parts. Instead, write to us at: Tiger Electronics, Ltd. Repair Center 980 Woodlands Parkway, Vernon Hills, Illinois 60061, U. S. A. Please include a note with your return explaining the problem along with a sales slip, date, place of purchase and price paid. We will do our best to expedite your return promptly. 5. The "closed" Room Alarm should look like as indicated above. The destroyer droid will have its head down, upper limbs folded up toward the head, the lower limbs folded in toward the body, and the guns folded up toward the head. The Room Alarm is designed to detect very small changes in heat. It is important to know that the Heat Sensor is set up to detect intruders that interrupt the Intruder Detection Area. Stand the Room Alarm on any flat surface. Rotate the Room Alarm so that the sensor lens faces the direction desired for the Intruder Detection Area. See the diagram below to further understand how to position the Room Alarm. Tiger Electronics, Ltd. [. . . ] If the Room Alarm is in the "attack" position when an intruder is detected, it will sound the alarm but it will not move. Resetting the Room Alarm into the "closed" position before an intruder is detected will allow the Room Alarm to sound the alarm and open to the "attack" position when an intruder is detected. Some states do not allow limitations as to how long an implied warranty lasts and/or exclusions or limitations of incidental or consequential damages, so the above limitations and/or exclusions of liability may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. [. . . ]