User manual HASBRO SWORD IN THE STONE GAME

[. . . ] Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Ventilation To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams). [. . . ] PROVING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. Place the rotisserie support in position 3 and insert the spit in the hole provided on the back panel of the oven. Start the rotisserie using the SELECTOR knob to select mode or . 21 GB Programming cooking  A cooking mode must be selected before programming can take place. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the duration. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode  A cooking duration must be set before the end cooking time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. Extendable cooking zones The extendable radiant elements (B) are recognisable by the fact that they have a double heating zone. You can turn on only the smaller internal cooking zone or both the external and internal zones. The control knob allows you to choose between two power levels, which are both adjustable between a minimum value of 1 to a maximum of 9: • The lowest power level can be set by turning the knob clockwise from 1 to 9. • Turn the knob to completely ()) until you hear a ) slight click, to enable the maximum power level, which in turn can be adjusted between 9 and 1 by turning the knob anticlockwise. To restore the minimum power level, turn the knob and set it back to position 0. For double cooking zones, the first part of the knob movement activates the smaller cooking zone (internal). To activate both (internal and external), it is necessary to turn the knob completely ()) and then select the desired ) power level between 9 and 1. • Always use pans with a diameter that is large enough to cover the hotplate fully, in order to use all the available heat. • Make sure that the bottom of the cookware is always dry and clean to guarantee correct adherence and long life, not only for the cooking zones but also for the cookware itself. • Avoid using the same cookware that is used on gas burners: the heat concentration on gas burners may deform the base of the pan, causing it not to adhere correctly. • Never leave a cooking zone on without cookware on it because as it heats up and rapidly reaches the maximum level, it could damage the heating elements. [. . . ] To activate the FAST CLEAN cycle press and hold the button for approximately 4 seconds. The TIMER KNOB may be used to select the desired cleaning level; there are three default time settings which cannot be modified. Economy (ECO): turn the knob towards “-”. Intensive (INT): turn the knob towards “+”. [. . . ]