User manual HASBRO TALKIN TIGGER BOUNCE GAME

[. . . ] Grillsteking er særlig anbefalt for matretter som har behov for høy overflatetemperatur. Dette er for å spare miljøet og naturen. Dette både for å oppnå best mulig resultater, og for å spare en del energi (ca 10%). Hullene for den venstre skinnen befinner seg oppe, mens hullene for den høyre skinnen befinner seg nede. [. . . ] Always place cookware on the rack(s) provided. Cooling ventilation In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door. Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently. A temperature value can be set for all cooking modes between 60°C and Max, except for • GRILL (recommended: set only to MAX power level); • GRATIN (recommended: do not exceed 200°C). Do not place racks in position 1 and 5 during fanassisted cooking. In the GRILL and GRATIN cooking modes, place the dripping pan in position 1 to collect cooking residues (fat and/or grease). MULTI-COOKING • Use position 2 and 4, placing the food that requires more heat on 2. • Place the dripping pan on the bottom and the rack on top. gRILL • Insert the rack in position 3 or 4. Place the food in the centre of the rack. • We recommend that you set the maximum power level. Use the “+” and “-” buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed. Setting the end time for a cooking mode  A cooking duration must be set before the cooking end time can be scheduled. Follow steps 1 to 3 to set the duration as detailed above. Next, press the four digits on the DISPLAY begin to flash. Use the “+” and “-” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. and buttons Programming has been set when the are illuminated. [. . . ] If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend not using the oven until the seals have been replaced. GB Cleaning the appliance • The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. If these stains are difficult to remove, use only specialised products. [. . . ]