User manual HASBRO TOY STORY LCD GAME

[. . . ] If there is any doubt, contact a professionally qualified technician and do not use the appliance. all packaging (plastic bags , polystyrene foam , staples , etc. ) should be kept out of reach of children as it presents a potential hazard. 4 The appliance must be installed by a qualified individual in compliance with the instructions provided. [. . . ] There are 4 adjustable feet on the lower part of the cooker; these can be used to level the cooker when necessary. The appliance must be positioned so that it is level. Warping resulting from bad positioning can alter the features and performance of the appliance. The hob is designed for operation with an alternating current at the power supply voltage and frequency indicated on the data plate (this is located underneath the hob; alternatively the information may be found at the end of the instruction manual). Make sure that the local power supply voltage value is the same as the value indicated on the data plate. The appliance does not come with a power supply cable, because the size of this cable should be determined according to the type of electrical connection used (see connection diagram below). Open the terminal board, following the instructions for the adjacent figure: To install the power supply cable, follow the instructions below: • Loosen the cable clamp screw “V” and the wire contact screws (fig. • Fix the wires under the screw heads in accordance with the following diagram. 2 Connecting the power supply cable to the mains Find a plug which is suitable for the load indicated on the data plate and fit it onto the cable. The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the load indicated and must comply with current electrical regulations (the earth wire must not be interrupted by the switch). While the grill is operating, the oven door must be kept shut. The thermostat knob should also be positioned at a maximum of 200°C. • With function (fan), cooking takes place through the action of air which has been preheated by a heating element and which is then circulated inside the oven by a fan. The oven heats up very quickly, therefore the foods you wish to cook may also be placed inside the oven as soon as it is switched on. It is also possible to cook using two shelves at the same time. • The “quick defrosting” function takes place without using the heating elements; only the oven light and the fan are activated. 20 TIMER (ELECTRIC OVEN) This feature allows you to program the oven or the grill as follows: • Delayed cooking start time with a specified duration; • Immediate start with a specified duration; • Timer. Button functions: : timer with hours and minutes; : cooking time; : cooking end time; : -: +: manual change; set cooking time (countdown); set cooking time (counting upwards from zero). When the text “auto” appears, this indicates that the cooking duration and the time it is due to finish have been programmed in automatic mode. At this point, the oven will switch on automatically at 12:30 and switch off after 30 will minutes. When the oven is switched on, the symbol be displayed for the entire cooking duration. [. . . ] Important: cleaning must be performed horizontally, in the same direction as the satinfinish effect of the steel. • After cleaning, various treatments may be performed in order to restore the shine of the surfaces: only use products which are designed for use with stainless steel. Important: do not use abrasive powders, aggressive detergents or acidic substances for cleaning purposes. Removing/fitting the oven door The oven door can be removed in order to make cleaning the inside of the appliance easier. [. . . ]