User manual HASBRO TRANSFORMER BEAST WAR TRANSMETAL SCAVENGER

[. . . ] Make sure that the instructions are kept with the appliance if it is sold, given away or moved.  The appliance must be installed by a qualified professional in accordance with the instructions provided.  Any necessary adjustment or maintenance must be performed after the cooker has been disconnected from the electricity supply. The legs* fit into the slots on the underside of the base of the cooker. [. . . ] - + or button is pressed for an extended Switching on the hob To switch the hob on, press and hold the for approximately one second. Set the cooking duration using the buttons. Confirm by pressing the - + and Switching on the cooking zones Each cooking zone is controlled using a selector button and a power adjustment device button. Consisting of a double • To begin operating a cooking zone, press the corresponding control button and set the desired power level (between 0 and 9) using the buttons - + and button. The timer begins counting down immediately. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To display the time remaining for the other programmed hotplates, press the button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Practical advice on using the appliance  Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware. SUITABLE UNSUITABLE Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. * Cast iron Enamelled steel Special stainless steel Copper, Aluminium, Glass, Earthenware, Ceramic, non magnetic Stainless steel Switching off the hob Press the button to switch the appliance off. In addition, to obtain the best results from your hob: • Use pans with a thick, flat base in order to fully utilise the cooking zone. [. . . ] To activate the FAST CLEAN cycle press and hold the button for approximately 4 seconds. The TIMER KNOB may be used to select the desired cleaning level; there are three default time settings which cannot be modified. Economy (ECO): turn the knob towards “-”. Intensive (INT): turn the knob towards “+”. [. . . ]